







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Mountain View: What the Job Actually Involves
Cabinets & Countertops in Mountain View usually means new cabinet boxes and doors along the existing kitchen walls plus a new stone or quartz top, and most of these projects land between $14,000 and $45,000 depending on how much the layout and the old walls fight you. A straightforward cabinet-and-top swap runs 2 to 4 weeks from demo to final caulk, and the majority of that time is waiting on fabrication, not building. Call (833) 988-3521 for a free on-site estimate and a written, line-item quote.
How We Run a Cabinet and Countertop Job, Stage by Stage

The order matters more than people expect. Get the sequence wrong and you’re paying a fabricator to re-template because the cabinets moved a half inch. Here’s how we actually run it.
Stage 1: Measure, template, and lock the layout (day 1, about 3 hours)
We measure every wall to the inch and check for out-of-square corners, which are common in older Mountain View kitchens. You make your two biggest decisions here: cabinet line and door style, and countertop material and edge profile. Nothing gets ordered until the measurements are verified against the actual room.
Stage 2: Demo and prep (days 2 to 3)
Old cabinets and counters come out, and we inspect what’s behind them. This is where surprises live: water damage under a sink, unpermitted wiring feeding an old over-the-range microwave, or a wall that isn’t plumb. We document anything that changes scope and price before we touch it, not after.
Stage 3: Cabinet install and rough-in (days 4 to 6)
Base cabinets go in first, leveled and shimmed, then uppers. If you’re relocating an outlet or the plumbing for a new sink position, that happens now, before the tops are templated. You’ll want to decide on hardware pulls and any slide-out organizers by this point, because drilling after installation is easier than retrofitting later.
Stage 4: Countertop template and fabrication (days 7 to 14)
We template the installed cabinets, then the fabricator cuts the slab. Cambria and Silestone both run roughly 7 to 10 business days for fabrication in this market. This is the longest stretch and the one homeowners are least prepared for. The kitchen is functional but ugly during this window.
Stage 5: Counter install, sink, and finish (days 15 to 17)
Tops are set, the sink and faucet go in, and we caulk, seal, and do final cleanup. Plan for a punch walk the same week. Any adjustment you want gets logged and fixed, and the whole job sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Stock vs. semi-custom vs. full custom cabinets. Stock is fastest and cheapest, but it only fits standard dimensions. Semi-custom (Wellborn is a good example) gives you real door-style and finish choices and lands in the middle on price. Full custom is worth it when the room is odd-shaped or the ceiling is sloped.
- Quartz vs. granite vs. the engineered brands. Quartz (Silestone and Caesarstone are the two we get asked about most) is non-porous and doesn’t need sealing. Granite is natural stone with real variation and needs periodic sealing. Quartz wins on maintenance; granite wins if you want one-of-a-kind stone.
- Slab thickness and edge profile. Standard 3cm is what most people pick. A thick mitered edge looks substantial but adds fabrication cost. A simple eased edge is the least expensive and holds up best against chipping.
- Cabinet boxes: plywood vs. particleboard. Plywood holds up better under a wet sink. Particleboard is cheaper and fine in dry locations. Ask which is in the quote.
- Reface or replace. Refacing keeps your boxes and swaps doors and veneer. It’s roughly half the cost if your boxes are square and solid. If the boxes are sagging or the layout is wrong, replacement is the honest call.
What Cabinets & Countertops Cost in Mountain View, CA

Expect $14,000 to $45,000 for cabinets and countertops together in Mountain View. That range is wide because four or five things move it hard.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
What pushes you to the low end: same layout, standard stock or semi-custom cabinets, a modest quartz top, no plumbing or electrical moves, and a kitchen in the 100-square-foot range. What pushes you to the high end: a galley that becomes an open plan (structural work), relocating the sink or range (plumbing and electrical), a large island in a premium stone, full custom cabinetry, and any wall that needs reframing or a seismic retrofit tie-in.
What’s in a written estimate: demo, disposal, cabinet supply and install, countertop fabrication and install, sink and faucet set, and final caulk and seal. What’s often not: appliance purchase, electrical panel upgrades, drywall repair beyond the cabinet line, and any structural change. We put all of it on the page so the number you see is the number you pay. Our 0% financing for 18 months and $1,000 off projects over $10,000 both apply.
See the difference
Before
After
Before
After
Before
AfterWhat Mountain View Homes Specifically Do to This Job
Mountain View is a strange market to build in. Post-war Eichler and ranch tract homes sit on slab-on-grade foundations a few blocks from Google and LinkedIn, so a cabinet job here routinely collides with mid-century construction details. Original single-pane glazing and galvanized supply plumbing show up on almost every 1950s-era kitchen we open, and a sink relocation often means a full repipe decision before the countertop is even templated. The city’s permitting and inspection culture is unusually demanding because it’s both a historic suburban town and a global corporate headquarters, and inspectors want to see the original unpermitted converted garage or bonus room addressed before a major remodel closes out. Localized moisture from the baylands and nearby creeks means we’re checking under-sink cabinet bottoms and toe-kick areas for old water damage more often here than in a drier market. If the wider project grows past cabinets & countertops, that’s where our Kitchen Remodeling in Mountain View scope takes over. We cover the whole of Mountain View, including the 94041 and 94042 ZIP codes, and homeowners often pair this work with a Garage Conversion ADU in Mountain View when the old converted garage needs to become legal space. Our Kitchen Remodeling service hub lays out the broader scope, and if the property is growing a new structure, a New Detached ADU in Mountain View is the related job.
Serving Mountain View, CA – Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Mountain View

Two to four weeks from demo to final walk-through, with about two of those weeks spent waiting on countertop fabrication. The install itself is fast, usually three to four working days. Call (833) 988-3521 for a firm schedule based on your actual room.
A straight cabinet-and-counter swap usually doesn’t require one; moving plumbing, electrical, or any wall does. The local pro pulls permits and passes inspection as the scope requires, and we tell you upfront which path applies to your job. Call (833) 988-3521 to walk through your scope.
Yes, and it’s the single best way to stay at the low end of the $14,000 to $45,000 range. Keeping the sink and range where they are avoids plumbing and electrical rework. You still get new boxes, doors, and a new quartz top. Call (833) 988-3521 for an exact quote, and estimates are free.
Not without your written approval. We document anything we find behind the old cabinets and present the number before we proceed. That’s what “upfront pricing, no surprises” means in practice. Call (833) 988-3521 to schedule your free estimate.
Every project is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. That’s built into the written quote. Call (833) 988-3521 for details.
Get a Free Estimate on Cabinets & Countertops in Mountain View
Call (833) 988-3521 and a live person answers, day or night, with no voicemail. We’ll schedule a free on-site estimate for your cabinets & countertops in Mountain View, measure the room, and hand you a written, line-item quote with no change-order surprises. Our technicians bring up to 12 years of experience, arrive background-checked and in uniform, and every project carries the 730-Day Done Right Promise. From foundation to finish line, backed in writing.
Written by the team at Groundwork Construction Co.












