







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Mountain View: What It Costs and How Long It Takes
Concrete driveways and concrete work in Mountain View typically run $4,500 – $12,000 for a full driveway pour, and most residential jobs take four to seven working days from demo to cure. A replacement where the old slab has to come out and the base rebuilt usually lands in the $5,000 – $14,000 range. Call (833) 988-3521 for a free on-site estimate with a written line-item quote, no change orders once the number is set.
How the work actually runs, stage by stage

Concrete isn’t a mystery job, but the sequence matters more than most homeowners expect. Here’s what the days look like on a Mountain View driveway or flatwork pour.
Stage 1: Demo and site protection (day 1 – 2)
We break out the old slab with a mini-excavator and hand tools, haul away the debris, and protect the house, fence line, and landscaping. On a typical Mountain View ranch lot the old driveway is 50 – 70 years old, so time gets spent checking for surprises beneath it: buried irrigation, old gas stubs, and occasional root intrusion from a mature street tree. You’ll want to be home for the first hour to confirm exactly where the new slab edges land against the garage and sidewalk.
Stage 2: Excavation and base prep (day 2 – 3)
We excavate 6 – 8 inches below finish grade, compact the subgrade, and lay in a 4-inch class-2 aggregate base. This is where the job’s durability is won or lost. Mountain View’s slab-on-grade ranch homes often sit on clay-heavy soil near the creeks and baylands, and without proper base compaction and drainage, a new slab will crack within a few seasons. You’ll decide here whether to add a drainage channel at the low side of the driveway, which we recommend on any lot where water pools at the garage door.
Stage 3: Forming, rebar, and inspection (day 3 – 4)
We set forms to grade, tie #4 rebar on a 16-inch grid, and install any sleeves or conduit. If the driveway crosses a public sidewalk, or the job touches a retaining wall or the garage slab, the city inspection happens at this point, before any concrete goes down. You’ll want to know the inspection date in advance so you can be present if you like.
Stage 4: The pour and finish (day 4 – 5)
Concrete arrives by truck, gets placed in one continuous run when possible, and is screeded, floated, and finished to the surface you chose at the quote stage. For a driveway, a light broom finish is the upright recommendation; it holds grip in wet weather without the slip risk of a polished surface. Control joints get cut within 24 hours to control where the slab cracks.
Stage 5: Curing and cleanup (day 5 – 14)
A finished slab takes 28 days to reach full strength but can be walked on within 24 – 48 hours and driven on within seven days. We keep the slab moist-cured during the first week and do a final walkthrough once the cure window closes to check joints, finish, and drainage. The 730-Day Done Right Promise covers the workmanship for the life of that cure and well beyond.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions happen at the quote stage and they change both cost and how the driveway performs over the next two decades.
- Standard gray concrete: the most cost-effective choice, usually $4,500 – $9,000 for a two-car driveway. Holds up well and needs no special care, but shows tire marks and oil stains more than other finishes.
- Exposed aggregate: a textured, pebbled surface with strong grip. Costs a bit more than gray and is popular on sloped Mountain View driveways, though it’s harder to clean than a smooth finish.
- Broom finish (the default for driveways): the safety choice for wet-weather traction. We recommend it for nearly every driveway unless the buyer wants something specific.
- Rebar vs. mesh: #4 rebar on a 16-inch grid is the spec we use for driveways and heavy-traffic slabs. Wire mesh saves money but won’t hold a slab together the way properly placed rebar does on a clay-soil lot.
- Base thickness: 4-inch compacted base is the standard for residential driveways; heavier vehicles or a long run push it to 6 inches, and the cost rises with it.
- Integral color vs. plain gray: pigment added at the plant gives a uniform tone without a surface coating. Adds roughly 10 – 15% to the slab cost and doesn’t chip or flake.
What Concrete Driveways & Concrete Work costs in Mountain View, CA

Most Mountain View concrete driveway and flatwork jobs fall between $4,500 and $12,000. Here’s how the number breaks down before we ever see your lot.
| Line item | Typical range |
|---|---|
| New concrete driveway installation | $4,500 – $12,000 |
| Full driveway replacement (demo + rebuild) | $5,000 – $14,000 |
| Driveway sealing add-on | $250 – $700 |
Four variables drive a quote from the low to the high end. Size is the biggest: a single-car driveway at 300 square feet lands near the floor, a wide two-car driveway with an apron to the street jumps toward the ceiling. Demo difficulty adds cost when the old slab has rebar, when a large tree sits against it, or when hauling has to happen through a tight side yard. Base and drainage work pushes the price up on any lot where the grading or downspout runoff needs correcting. Finish and inspection scope adds when the driveway meets a public sidewalk or interfaces with a retaining wall, both of which require a Mountain View inspection sign-off.
A written estimate should spell out the linear footage, slab thickness, rebar spec, base depth, finish, and the inspection scope. What’s not included by default: replacing landscaping, relocating irrigation lines, or handling a hidden utility line discovered under the old slab. We flag those before the pour, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Mountain View homes specifically do to this job
Mountain View is a distinct job site because the city stacks historic suburban housing against the highest concentration of tech money in the country. The permitting culture is unusually demanding on both fronts: the city is a mid-century residential community and a global corporate headquarters town at the same time, so a driveway that touches the sidewalk on a modest post-war ranch lot may get the same inspection scrutiny as an all-electric high-performance remodel two blocks from Google or LinkedIn. The housing stock is overwhelmingly 1950s – 1970s single-story ranch and Eichler-style homes on slab-on-grade foundations, which means most Mountain View driveways we replace are original pours from that era, with the concrete tied into the garage slab and the garage often an unpermitted conversion that has to be addressed before a major exterior project can close out inspection. On the eastern side of the city, the baylands and nearby creeks create localized drainage conditions, and a driveway that runs to a low garage floor will pool in the first wet winter unless we grade for it. If your job is part of a wider scope, our Driveway & Pavers service and the broader Driveway & Pavers in Mountain View page lay out the full picture.
Serving Mountain View, CA – Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Mountain View

A full driveway replacement takes four to seven working days from demo to final cleanup, with the 28-day cure continuing after we leave. You can walk on it within 24 – 48 hours and drive on it after about seven days. Call (833) 988-3521 to get a timeline tied to your specific lot.
A driveway that stays entirely on private property usually doesn’t require a permit, but any driveway that meets the public sidewalk, interfaces with a retaining wall, or touches the garage slab frequently does. We confirm the permit scope at the estimate and pull everything needed before demo starts. Call (833) 988-3521 and we’ll walk through your lot’s specific requirements.
No. Our written line-item quote is the number you pay, with no change orders unless you decide to add scope after the estimate. The only thing that can change a price is buried work we couldn’t see before demo, and that gets a new written approval before it goes in.
Most Mountain View concrete driveway jobs fall between $4,500 and $12,000 for a new install and $5,000 – $14,000 for a full replacement including demo. Add $250 – $700 if you want a sealing coat after the cure. Call (833) 988-3521 for an exact quote on your lot – estimates are free.
Every concrete job we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That’s on top of the material supplier’s own product warranty. To schedule a Mountain View estimate, call (833) 988-3521.
Poured concrete is a long-horizon purchase, and on a Mountain View ranch lot the difference between a slab that lasts 40 years and one that cracks in five comes down to base prep and drainage, not the mix. Homeowners often pair a driveway pour with ADU Site Prep & Utilities in Mountain View, and when the garage door or entry door is on the same project we handle it under Door Installation in Mountain View. We cover the full Mountain View area, including Los Altos, Sunnyvale, Cupertino, and Santa Clara.
Get a free concrete estimate for your Mountain View property
Call (833) 988-3521 to schedule a free on-site estimate. A real person answers 24/7, and on the visit we measure the driveway, check the base and drainage, and leave you with a written line-item quote within a couple of days. No pressure, no change orders, and every job backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












