







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Campbell, CA: What It Costs and How Long It Takes
A chain link fence in Campbell, CA typically runs $3,500 to $9,000 for a residential yard, and most jobs take one to three days from layout to final tension check. The number that matters is the linear footage, the height, and whether the ground is level or needs grading. Call (833) 988-3521 for a free on-site estimate with a written, line-item quote before anyone touches a shovel.
How We Build a Chain Link Fence, Step by Step

Chain link looks simple until you hit an old orchard lot with a buried fence line, a sloping side yard, or a property corner nobody has agreed on in decades. Here’s the real sequence, and where your decisions land.
1. Site walk and layout (day 1, about 60 – 90 minutes)
We walk the property line with you, confirm the corners, and check for sprinkler lines, gas stubs, and old concrete footings just under the surface. On Campbell’s small postwar lots, the setback from a neighbor’s fence or a side-yard easement often eats a foot you weren’t planning on. You decide the exact line here, and we mark it before any digging starts.
2. Utility check and mark-out (before digging, same day)
We call for the underground utility marks before a single post hole gets dug. This is the step that protects the water main, the irrigation you forgot about, and your neighbor’s cable drop. It adds a day of waiting in most cases, and nobody should skip it.
3. Demo and prep (day 1 – 2)
Old fence comes out, posts and concrete included. We haul it away. If the ground needs grading to keep a top rail level across a slope, that happens now, not after the posts are set.
4. Post setting and concrete cure (day 2)
Line posts go in at 8 to 10 foot spacing, corner and terminal posts get larger footings, and the concrete cures before we hang anything. Skimping on cure time is why fences lean after one wet winter. We set the posts and let them sit.
5. Fabric, rails, and tension (day 3)
Top rail, tension wire, fabric, and the gate hardware go on last. We walk the fence for stretch and tension, check the gate swing, and clean up. You sign off on the finished line against the layout you approved on day one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Chain link is not a single product. The specs below are where the price swings, and where a cheap quote and a fair quote stop being the same thing.
- Height: 4-foot is the common residential pick for a boundary line. 6-foot gives more privacy and containment for a dog. Going above 6 feet usually triggers a height review with the City of Campbell, so ask before you decide.
- Gauge (wire thickness): 11.5-gauge is the light residential standard. 9-gauge is heavier and holds up better against kids, dogs, and branches. The cost per foot difference is real but modest over a long run.
- Coating: Galvanized is the budget choice and can show surface rust over time in wet winters. Vinyl-coated (black or green) costs more and blends into landscaping far better on a small Campbell lot.
- Gates: A standard walk gate is straightforward. A vehicle gate with upgraded hinges and a self-closing latch is where hardware quality matters most.
- Terminals and bracing: Corner posts need proper bracing. This is invisible in the finished fence and it’s the first thing to cut on a low bid.
If the fence is step one of a bigger yard project, homeowners often pair this with ADU Site Prep & Utilities in Campbell so the utility trenching and fencing don’t get done twice.
What Chain Link Fence Costs in Campbell, CA

Expect $3,500 to $9,000 for a residential chain link fence in Campbell. A small 4-foot boundary run on level ground sits near the low end. A long 6-foot vinyl-coated run with a vehicle gate and slope grading pushes toward the top.
| Line item | Typical range |
|---|---|
| 4-foot galvanized, per linear foot | $18 – $28 |
| 6-foot galvanized, per linear foot | $24 – $36 |
| 6-foot vinyl-coated, per linear foot | $30 – $45 |
| Walk gate (installed) | $300 – $650 |
| Vehicle gate (installed) | $800 – $2,000 |
| Old fence demo and haul-away | $300 – $900 |
What moves the number: total linear footage, height and gauge, coating type, whether the ground needs grading or the old concrete footings have to be broken out, and whether a permit or height variance gets pulled. A written estimate should state footage, height, gauge, coating, gate count, demo, and haul-away line by line. What it should not hide is footing depth or a per-post charge that shows up later. Upfront pricing means the number you see is the number you pay.
The 730-Day Done Right Promise covers the workmanship. If a post leans or a gate sags, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Campbell’s Lot History Does to a Chain Link Job
Most of Campbell was built as orchard land and filled in with 1950s and 1960s ranch homes on small lots. That matters here: property corners were often staked by hand decades ago and shifted, so the first argument on a chain link job is usually where the actual line sits. In the older downtown blocks and around the Pruneyard-adjacent streets, second-story additions and rebuilds have moved fences more than once, which means we’re often pulling an old line and re-tying into a footing that isn’t where anyone thought. Add the rain-shadowed Santa Clara Valley pattern, with wet winters and dry summers, and a post set in shallow soil will lean by spring. That’s why we don’t shortcut footing depth. We cover the whole city, including the 95008, 95009, and 95011 ZIP codes, and the fence work is a natural fit alongside Door Installation in Campbell when a gate and an exterior door are being upgraded in the same stretch. If the fencing is part of a larger Fence Installation in Campbell project, we scope both together so the grading and posts are planned around the whole run.
Serving Campbell, CA – Our Local Coverage Area
We serve Campbell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Campbell

Most residential chain link fence jobs in Campbell take one to three days on site, plus a day up front for the utility mark-out. Longer runs or sloped ground add time. Call (833) 988-3521 for a schedule estimate on your specific yard.
Many chain link fence installations under 6 feet on a standard lot don’t require a permit, but height and property-line rules vary. Anything above 6 feet or on a corner lot triggers review with the City of Campbell. We confirm the requirement early and pull what’s needed, and the local pro is licensed and insured as California requires. Call (833) 988-3521 to talk through your property.
Yes, in most cases. We set posts with targeted digging rather than grading the whole yard, and we route around established landscaping and irrigation. The one exception is a badly sloped run that needs the top rail leveled, and we’ll tell you up front if that’s likely. Call (833) 988-3521 to walk the yard with us.
A 6-foot chain link fence in Campbell typically runs $24 to $36 per linear foot galvanized, or $30 to $45 vinyl-coated, with the total landing inside the $3,500 to $9,000 range for a full residential run. Gates and demo add on top. Call (833) 988-3521 for a written quote with line items.
The workmanship is covered by our 730-Day Done Right Promise, one of the longest in residential construction. If a post shifts or a gate hangs wrong, we make it right. Call (833) 988-3521 to schedule your free estimate and get the terms in writing.
Get a Free Chain Link Fence Estimate in Campbell
Call (833) 988-3521 and we’ll set a time to walk your property line, measure the run, and talk through height, gauge, and coating options. You’ll get a written, line-item estimate with no surprises and a clear timeline. Calls are answered by a live person, and the estimate is free. Reach us through our Fence Installation service or the Campbell service area page if you’d rather start there.
Written by the team at Groundwork Construction Co.












