







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in San Jose, CA
A walk-in shower installation in San Jose typically runs $6,500 to $18,000 for a full tear-out and replacement, with most homeowners landing between $9,000 and $13,000 depending on tile, glass, and whether the drain or plumbing moves. The job replaces a tub or outdated stall with a low-threshold, curbless or near-curbless shower you can step into without lifting a leg over a wall. That matters in a city full of 1950s and 1960s ranch homes where the original tub-and-tile combo is now 60-plus years old and the framing behind it has quietly absorbed decades of moisture.
We build these showers as part of our Bathroom Remodeling work across San Jose, and we treat the waterproofing as the whole ballgame. A beautiful tile job over a bad pan fails in three years. We slope, line, and flood-test every pan before a single tile goes down, then back the finished work with the 730-Day Done Right Promise: if it’s not done right, we make it right. Call (833) 988-3521 and a live person answers, day or night, to set up your free estimate.
Most of our San Jose shower projects start with the same conversation: the homeowner has one bathroom, they’re tired of stepping over a tub wall, and they’ve already been quoted two vague numbers by contractors who wouldn’t put anything in writing. We put it in writing. Upfront pricing, no surprises. That’s the whole pitch.
Key Takeaways
- Full walk-in shower replacement in San Jose: roughly $6,500 to $18,000, most jobs $9,000 to $13,000.
- Curbless and low-threshold designs require careful floor framing and drain relocation, which adds cost but delivers the safest, most accessible result.
- Waterproofing and flood-testing happen before tile. We never skip this and neither should anyone you hire.
- Background-checked, uniformed technicians on every job, backed by our 730-Day Done Right Promise.
- Schedule a free estimate at (833) 988-3521. Calls answered by a live person 24/7.

When You Need Walk-In Shower Installation
San Jose homeowners call us for a walk-in shower when the current bathroom has stopped working the way they need it to. Here are the situations we see most, and most of them are specific to how homes around here were built.
- The tub wall has become a hazard. Stepping over an 18-inch tub apron is the number one fall risk in a bathroom for older adults. In Willow Glen and the Rose Garden, we regularly swap out original cast-iron tubs for curbless showers so a parent or grandparent can move safely without a caregiver present.
- The original shower pan is leaking into the subfloor. San Jose’s older homes were often built with copper pans or mastic-set tile that held up for decades but not forever. Telltale signs: a soft spot near the drain, loose tile, or a water stain on the ceiling of the room below. When we pull the pan, we frequently find rot in the joists that has to be sistered before the new shower goes in.
- You want to age in place. A walk-in shower with a linear drain, a built-in bench, and a grab-bar-ready wall is a remodel you do once and live with for 30 years. Plenty of Almaden Valley and Cambrian clients are planning ahead rather than reacting to a fall.
- The tub is underused and the shower is too small. If nobody has taken a bath in a decade and the stall is a cramped 32-inch unit, converting the whole footprint to a spacious walk-in gains you usable floor area without expanding the room.
- You’re selling and the bathroom is dated. A clean walk-in shower with modern tile is one of the more reliable updates for resale in San Jose’s market, where buyers walk in already comparing bathrooms line by line.
- The existing shower has ugly, hard-to-clean surfaces. Old cultured marble, plastic surrounds, and grimy grout lines drive a lot of our calls. Large-format porcelain and a frameless glass panel fix the cleaning problem at the source.
Our Walk-In Shower Installation Process
Every walk-in shower we build follows the same sequence. The order matters because waterproofing that happens after tile is waterproofing that doesn’t work. Most single-shower jobs are completed in about a week to ten days of on-site work.
- Free estimate and design consult. We walk the bathroom with you, measure the actual footprint, check the subfloor and drain location, and talk through layout, tile, and glass. You get a written, itemized price before anything is ordered. No-hassle upfront pricing means the number you see is the number you pay.
- Demo and rough-in. We protect the rest of the house, pull the old tub or shower, and haul it away. If the drain has to move for a curbless design, this is when the framing and plumbing get reworked.
- Framing, pan, and waterproofing. We build a properly sloped mortar pan, install a bonded waterproofing membrane up the walls and over the curb, and flood-test the pan to confirm it holds water before we move on. This step is invisible in the finished shower and it’s the one that decides whether the job lasts.
- Tile and finish. We set the wall and floor tile, grout, and install fixtures, a niche or bench if the design calls for it, and a linear or center drain as planned. Glass gets templated after tile is set so the fit is exact.
- Glass, trim, and hardware. Frameless glass goes in, along with the shower valve trim, head, and any grab bars. We do a final water test and clean the space.
- Walkthrough and warranty. We walk the finished shower with you, show you how the drain and glass should be maintained, and hand over your coverage under the 730-Day Done Right Promise.
If the shower work is part of a bigger bathroom overhaul, we fold it into the same schedule so you’re not coordinating two contractors and two timelines. That’s the value of hiring one partner from foundation to finish line.

Walk-In Shower Installation Pricing in San Jose
Walk-in shower installation in San Jose ranges from about $6,500 for a straightforward tub-to-shower conversion with standard tile to $18,000 and up for a curbless design with premium large-format tile, custom glass, a bench, and relocated plumbing. The most common full-replacement project lands between $9,000 and $13,000. Here’s how the line items break down so you can see where your money goes.
| Line Item | Typical Range |
|---|---|
| Demo and haul-away of old tub or shower | $600 – $1,400 |
| Rough plumbing (drain/valve relocation, if needed) | $800 – $2,500 |
| Framing, sloped pan, waterproofing, flood test | $1,500 – $3,000 |
| Wall and floor tile (material + labor) | $1,800 – $6,000 |
| Frameless or semi-frameless glass enclosure | $1,200 – $3,500 |
| Fixtures, valve, head, niche or bench | $800 – $2,800 |
| Grab bars and accessibility hardware | $200 – $700 |
What pushes a San Jose walk-in shower toward the top of the range: converting to curbless requires recessing or re-framing the floor to get the slope, which is real carpentry work. Premium porcelain or natural stone adds material cost. A linear drain costs more than a center drain but gives a cleaner, more accessible floor. And if we open a wall and find rot or old galvanized plumbing, that repair gets added transparently before we continue.
We pair upfront pricing with 0% financing for 18 months and $1,000 off projects over $10,000, so a full bathroom remodel that includes the shower is more reachable than the sticker suggests. Ask about it on your free estimate call.
Curious how the shower fits into a full bathroom project? See our Bathroom Remodeling in San Jose page for the wider scope, or start from our home page to see all seven of our service lines.
FAQs – Walk-In Shower Installation
How much does a walk-in shower installation cost in San Jose?
A walk-in shower installation in San Jose typically costs $6,500 to $18,000, with most full tub-to-shower conversions landing between $9,000 and $13,000. Curbless designs, premium tile, custom glass, and plumbing relocation push the number toward the high end. The exact figure depends on your bathroom’s footprint and your finish choices. Call (833) 988-3521 for a free, itemized estimate with upfront pricing.
Can you do a curbless walk-in shower in my San Jose home?
Yes, in most cases. Curbless showers require recessing the floor or re-framing to create the slope, so the answer depends on your Joist depth and where the drain sits. We assess this during the free estimate and tell you honestly whether curbless is straightforward, needs extra framing, or isn’t the best fit for your floor structure. A low-threshold option is often the practical alternative.
How long does a walk-in shower installation take?
A single walk-in shower replacement is usually completed in about one to two weeks of on-site work, from demo through final glass. The waterproofing step, including flood-testing the pan, adds a couple of days on its own and is never rushed. If the shower is part of a larger bathroom remodel, the timeline runs longer. We give you a schedule in writing before we start.
Is it cheaper to repair my shower or replace it with a walk-in?
For a leak or a single failed tile, a repair can make sense and be far cheaper than a replacement. But if the pan is failing, the tile is 30 years old, or you need accessibility, replacement wins on cost per year of use. A walk-in shower that’s built right lasts decades. Call (833) 988-3521 and we’ll tell you straight whether a repair will actually solve your problem or just postpone it.
Written by the team at Groundwork Construction Co. of San Jose, serving San Jose.
Ready to Start Your Walk-In Shower?
A walk-in shower is one of the remodels you feel every single day, and getting it right the first time saves you from tearing it out later. Groundwork Construction Co. of San Jose brings background-checked, uniformed technicians, a curated set of trusted brand partners, and the 730-Day Done Right Promise to every shower we build. Our technicians have up to 12 years of experience, and we’re proud to serve San Jose and the surrounding communities.
Call (833) 988-3521 for a free estimate and design consult. A live person answers 24/7, ready to talk through your bathroom and put a real number in front of you. Built to last, backed in writing.


