







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in San Jose, CA
An iron fence in San Jose typically costs $3,200 to $9,500 for a typical residential front or side yard, with ornamental aluminum running less and true wrought iron running more. Iron fencing is the right call when you want a boundary that reads as permanent and secure without blocking the view, and that’s exactly the job a well-built iron fence does in a city where most lots sit close together and sightlines matter. Groundwork Construction Co. of San Jose installs ornamental iron and aluminum fencing across the valley, from the older bungalow blocks of Willow Glen to the newer hillside lots off Communications Hill. We answer the phone live, day or night, at (833) 988-3521, and the local pros we connect you with carry a 730-Day Done Right Promise on the workmanship.
This page covers ornamental iron specifically. If you’re still deciding on material, our full Fence Installation page walks through wood, vinyl, chain link and composite side by side. If you’ve already settled on metal, keep reading – the details below are the ones that decide whether an iron fence lasts thirty years or starts leaning in five.
Why iron and ornamental aluminum earn their price here
San Jose sits in a dry-summer Mediterranean climate, which is good news for metal fencing and bad news for the wooden fences that dominate most neighborhoods. A cedar or redwood fence along a sunny west-facing property line in Almaden Valley takes a beating from UV and dry rot, often showing real wear by year ten. Iron and aluminum don’t rot, don’t feed termites, and don’t need repainting every few years. They cost more up front and less over the long haul. That math is why so many homeowners near the Rose Garden and along the Alameda end up choosing metal for their street-facing boundary even when the backyard stays wood.
Groundwork Construction Co. has been doing this work since 2014, and our technicians bring up to 12 years of hands-on fencing experience. We source iron and aluminum through brand partners like Ameristar and Jerith, so the powder coat, weld quality and panel tolerances are consistent from the first section to the last. Built to last, backed in writing – that’s the idea behind every fence we put in the ground.

When You Need Iron Fence
Iron fencing isn’t right for every property, and we’ll tell you so when it isn’t. Here are the situations where it’s clearly the correct answer, drawn from what we see across San Jose.
- You want security without losing the view. A solid wood fence buys privacy but walls off the street. Iron gives you a visible boundary that signals “this property is enclosed” while keeping light and sightlines open. On corner lots in areas like Naglee Park, that openness is often the deciding factor.
- Your property line borders a sidewalk or street. Street-facing iron is tougher and holds up to both weather and pedestrian traffic far better than wood. Homeowners along busy corridors in downtown San Jose and near Santana Row regularly choose ornamental iron for exactly this reason.
- You have a pool or a slope that needs a real barrier. Iron fences provide a secure perimeter around pools and along retaining walls on hillside lots in Evergreen and the foothills off Mount Hamilton. We’ll flag the safety requirements in play before any post goes in.
- Your old wood fence is failing along the fence line. Rot at the posts, leaning panels, termite damage in the rails – when a wood fence hits its last years, metal is a far longer-lived replacement. We see this most in the older neighborhoods where fences date to the same era as the houses.
- You’re matching an existing iron fence or HOA standard. Many San Jose HOAs and Planned Unit Developments specify ornamental aluminum or iron for front boundaries. If it’s in the CC&Rs, matching the approved style and color keeps your project moving without a fight.
- You want a gate you can trust. Iron gates on reliable hinges and latches hold up to daily use and look sharp at a driveway entrance or side-yard walkway. That’s a common add-on when the main fence goes in.
Our Iron Fence Process
From first call to final walkthrough, here’s how a Groundwork iron fence project moves. No vague bids, no crews that vanish mid-job.
- Free estimate and design consult. We come out, measure the run, look at the soil and grade, and talk through style, height, and gate placement. You get an upfront price – the number you see is the number you pay. Estimates are free, and there’s a standing $1,000 off on projects over $10,000, plus 0% financing for 18 months if the budget needs stretching.
- Confirming the line and any permits. Iron fence height and placement are governed by San Jose code, and some lots have easements or slope issues that affect the plan. We check setbacks and permit requirements for your specific parcel before we order a single panel, so you’re not surprised by a stop-work notice.
- Material selection and ordering. You choose the style, color and finish. We order through partners like Ameristar and Jerith so the panels, posts and hardware arrive matched, with consistent powder coat from section to section. Most iron product is fabricated to order, so we give you a clear lead time up front.
- Site prep and post setting. Old fence comes out, holes are dug and set to depth, and posts go in plumb and level. On sloped lots we step or rack the panels to follow grade rather than forcing a level line that leaves gaps at the bottom. Posts are set in concrete so the fence holds firm through the dry season and the occasional winter rain.
- Panel install, gates and cleanup. Sections are mounted, gates are hung and adjusted so they swing and latch properly, and the job site is cleared. Most jobs are completed in a single visit once materials are on site. The crew on your property is background-checked and arrives in uniform – no unmarked van, no strangers.
- Final walkthrough and your written guarantee. We walk the full fence line with you, check every gate and post, and hand over the 730-Day Done Right Promise in writing. If anything isn’t right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to fence work the same as any other project.

Iron Fence Pricing in San Jose
You want a real number, not a “starting at” tease. Here are the honest ranges we see for ornamental iron and aluminum fencing in San Jose. Exact pricing depends on height, style, length, gate count and site conditions, which is why the free on-site estimate matters.
| Item | Typical price range in San Jose |
|---|---|
| Ornamental aluminum fence (per linear foot) | $45 to $75 |
| True wrought iron fence (per linear foot) | $70 to $130 |
| Walk gate (installed) | $450 to $1,200 |
| Driveway gate (installed) | $1,800 to $5,500 |
| Old fence removal and haul-away | $250 to $700 |
| Slope or retaining-wall work at the line | $300 to $1,500 (varies widely) |
What moves the number up or down:
- Length of the run. Price per foot drops a bit on long runs because setup and travel spread across more fence.
- Height and style. A 4-foot ornamental aluminum fence costs less than a 6-foot wrought iron with spear finials and decorative scrollwork.
- True wrought iron vs. ornamental aluminum. Aluminum looks similar, costs less, won’t rust, and is the practical choice for most homes. Wrought iron is heavier, denser, and the premium option when you want the real thing.
- Gates. Each gate adds hardware, framing and adjustment. Automated driveway gates add significantly more.
- Grade and soil. A flat Willow Glen lot installs faster than a sloped Evergreen hillside where posts need extra depth and panel racking.
- Permits. Some height and placement situations require a permit; we identify those before you commit.
No-hassle upfront pricing is the rule: the number you see is the number you pay. Combine that with the standing $1,000 off on projects over $10,000 and 0% financing for 18 months, and a larger metal fence often fits a budget that a wood-and-someday-replace plan doesn’t. Call (833) 988-3521 for a free estimate – we’ll put a real number in front of you in writing.
FAQs – Iron Fence
How much does an iron fence cost in San Jose?
An iron fence in San Jose typically runs $3,200 to $9,500 installed for a standard residential boundary, working out to roughly $45 to $75 per linear foot for ornamental aluminum and $70 to $130 per linear foot for true wrought iron. Gates, height, slope and old-fence removal push the total up or down. Call (833) 988-3521 for an exact quote – estimates are free.
Is ornamental aluminum as good as wrought iron?
For most San Jose homes, ornamental aluminum is the smarter choice: it won’t rust, needs almost no maintenance, costs less, and looks nearly identical to wrought iron. True wrought iron is heavier, denser and the premium pick when you want the look and feel of genuine forged metal. We’ll show you both options side by side during the estimate and let you decide.
Do I need a permit for an iron fence in San Jose?
Often it depends on height and placement. Front-yard and street-facing fences face more scrutiny than backyard ones, and height limits vary by zoning and HOA rules. We check your specific parcel’s setbacks and permit requirements before ordering materials so there are no surprises. Call (833) 988-3521 and we’ll talk through your property.
Can you install an iron fence over an old one or replace it?
We remove and replace. Leaving an old fence in place beneath or behind iron looks bad and creates a maintenance problem, so the standard approach is to pull the old fence, set new posts to proper depth and install fresh panels. Removal and haul-away typically adds $250 to $700 depending on length and condition. Call (833) 988-3521 for a same-week estimate.
How long does an iron fence last in San Jose’s climate?
A quality powder-coated iron or aluminum fence can last 25 to 40 years here, largely because San Jose’s dry summers and mild winters are gentle on metal compared to wetter climates. The main threats are corrosion at cut edges and damage from lawn equipment, both of which proper installation and occasional touch-up handle well. Built to last, backed in writing – and covered by the 730-Day Done Right Promise on our workmanship.
Groundwork Construction Co. of San Jose – your home for home improvement work from foundation to finish line. Call (833) 988-3521 for a free iron fence estimate; a live person answers around the clock.
Written by the team at Groundwork Construction Co. of San Jose, serving San Jose.


