







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom Cabinets & Countertops in Livermore, CA: Scope, Timeline and Cost
New cabinets and countertops in Livermore typically run $14,000 – $45,000 for a full kitchen package, with cabinet installation alone at $4,000 – $13,000 and countertop fabrication and install at $2,000 – $6,500. Most jobs take 3 to 5 weeks from templating to final caulk, and permits are usually not required unless you move plumbing, gas or load-bearing walls. Call (833) 988-3521 for a free on-site estimate with a written line-item quote.
How Cabinets & Countertops Go In, Week By Week

Here’s the actual sequence. No hand-waving.
Days 1 – 2: Demo and layout check
Old cabinets and tops come out first, along with the backsplash if it’s being replaced. We check the walls for plumb and the floor for level, because Livermore’s soil movement has a way of throwing older kitchens out of square. You confirm the final layout here, including any shift of the sink off-center and where the new cooktop lands.
Days 3 – 5: Rough-in and substrate
If the plan calls for moving the sink, adding a dishwasher line, or relocating an outlet for the microwave, that happens now. This is the point where a hidden surprise shows up most often, usually old galvanized supply lines or a wall cavity that isn’t deep enough for a standard cabinet. We photograph everything behind the walls before closing it up. You approve any change-order work before it proceeds, at the number we quote.
Days 6 – 9: Cabinet install
Base and upper cabinets go in and get shimmed, scribed and blocked to the wall. That’s the stage where a level, square install separates a good job from a squeaky one. You walk the layout before the tops are templated.
Day 10: Digital templating
A laser template of the installed bases goes to the fabricator. You sign off on overhangs, edge profile and the sink cutout at this step. Fabrication takes 7 to 10 business days for most quartz and granite slabs, slightly longer for a rare color or an engineered surface like Cambria.
Days 12 – 14: Countertop set, sink, final trim
Countertops are set, the sink and faucet go in, and cabinet hardware, toe kicks and fillers get finished. We do a full walkthrough with you before we call it done, and the work is covered by our 730-Day Done Right Promise, so anything that settles or shifts gets corrected.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinets & Countertops Options You’ll Actually Choose Between
Most of the real decisions happen in the first week. Here are the trade-offs that matter:
- Stock vs. semi-custom cabinets. Stock boxes fit a limited size grid and cost the least, but they leave gaps you’ll fill with filler strips. Semi-custom, including lines like KraftMaid, lets you size to the inch. Worth it if your wall is out of square, which most pre-1950s Livermore kitchens are.
- Plywood vs. particleboard boxes. Plywood holds up to moisture and takes screws better. Particleboard is cheaper and fine in a dry inland climate, though we don’t recommend it under a sink.
- Quartz vs. granite vs. laminate. Quartz (the Cambria type) is non-porous and needs no sealing, which suits a hot, dry valley. Granite is natural and one-of-a-kind but needs sealing about once a year. Laminate runs a fraction of the cost and works for a rental or a quick flip.
- Full-overlay vs. inset doors. Full-overlay is standard and forgiving. Inset doors are the period-correct look for a downtown bungalow, but they cost more and expect a perfectly square box.
- Butcher block or a waterfall edge. Both cost more than a standard slab edge. Ask yourself who’s actually cooking on it.
What Cabinets & Countertops Costs in Livermore, CA

Expect $14,000 – $45,000 for a full kitchen’s worth of cabinets and countertops. Five things move that number:
- Kitchen size and cabinet run. A galley with 12 linear feet of cabinets sits at the low end. An L-shape with an island pushes the cabinet package toward $13,000.
- Existing condition. Old knob-and-tube wiring in a pre-war downtown home, or a floor that’s out of level from soil movement, adds labor before a single box goes in.
- Plumbing, gas and electrical relocation. Moving the sink, the range or a circuit turns a cabinet job into a permit job. Budget accordingly.
- Material grade. Laminate tops and stock boxes sit at $4,000 – $8,000. Quartz with semi-custom is $20,000 – $40,000.
- Added scope. An island adds $3,000 – $10,000, and a new backsplash adds $800 – $2,500.
What’s included in our written estimate: demo, cabinets, countertop fabrication and install, sink and faucet setting, hardware, and haul-away. What’s usually not: appliances, structural changes, or permit fees if your scope needs one. Upfront pricing means the number you see is the number you pay, with no change orders unless you approve them.
See the difference
Before
After
Before
After
Before
AfterWhat Livermore Homes Specifically Do to This Job
Livermore’s building stock splits right down the middle. In downtown 94550, you’ll find early-1900s bungalows and Victorians where the original cabinets have been painted over six times and nothing is plumb. We’ve measured plenty of kitchens along First Street and Livermore Avenue where the wall was a full inch out over an eight-foot run, which is why a semi-custom cabinet line pays for itself here. Those homes also carry pier-and-beam foundations and original wiring, so a simple cabinet swap sometimes uncovers a splice that needs to be brought up to code before we can hang an upper. On the eastern and southern edges, where vineyard and ranch land keeps turning into new subdivisions, we more often see tract kitchens from the 1990s that are simply dated, not failing, which brings the price down. The other Livermore factor is seismic: being close to the Greenville and Calaveras fault traces means any wall we open gets a careful look, and a cabinet job that turns structural gets engineering review. Hot inland summers mean we don’t leave a house closed up with fresh adhesive and unfinished cabinets overnight.
Serving Livermore, CA – Our Local Coverage Area
We serve Livermore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Livermore

Most Livermore jobs run 3 to 5 weeks from demo to final walkthrough, with about 7 to 10 business days of that being countertop fabrication. Call (833) 988-3521 for a timeline built around your kitchen.
No permit is required for a straight swap of cabinets or countertops at the same location. You will need one if the plan moves plumbing, gas or a load-bearing wall, and a job near a fault trace can trigger extra review. Call (833) 988-3521 for an exact quote.
Yes, and that’s the best-value version of this job. Keeping the sink, range and walls in place drops the price toward the low end of the range. Call (833) 988-3521 for a free estimate.
The typical range is $14,000 – $45,000, driven by kitchen size, existing condition and material grade. Call (833) 988-3521 for a written line-item quote.
Every job is backed by our 730-Day Done Right Promise. If it isn’t done right, we make it right. Call (833) 988-3521 to schedule your free estimate.
Get a Free Estimate for Cabinets & Countertops in Livermore
Call (833) 988-3521 and we’ll set up a free on-site estimate at your Livermore kitchen. We measure the space, walk the options with you, and leave you with a written line-item quote covering cabinets, countertops and labor. Our technicians have up to 12 years of experience. No pressure, no vague ballpark, just a number you can plan around.
Written by the team at Groundwork Construction Co.












