







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in San Jose: What to Know First
Groundwork Construction Co. of San Jose installs and repairs Belgard driveways, patios, walkways and pool decks across San Jose. Most Belgard paver projects we take on run one to three days for a repair or reset and three to seven days for a full driveway, depending on square footage and base condition. We quote the work line by line with upfront pricing, no surprises, so the number you see is the number you pay. This page is for San Jose homeowners who already own Belgard pavers or are pricing a new Belgard surface and want straight answers before anyone breaks ground.
We work as an independent Belgard service provider. We are not affiliated with or authorized by Belgard. Call (833) 988-3521 to schedule your free estimate.
How Belgard Products Fail – and How We Fix Them
Belgard makes genuinely good pavers. What we see on San Jose jobs is rarely a bad product, it’s base, drainage or joint sand problems plus a handful of series-specific quirks. Here are the five failure modes that come up most in this market.
- Efflorescence on Urbana and Catalina slabs. White mineral bloom that keeps returning after a rinse usually isn’t a surface stain, it’s moisture moving through the slab from a base that never drained. San Jose’s clay-heavy soil holds water under a paver field long after rain stops. We pull a few units, correct the base and slope, and reset with the right polymeric sand instead of sealing over the symptom.
- Joint sand washout on Mega-Lafitt and Bergerac styles. The tighter, more textured faces on these lines shed water across the surface fast, and a thin joint sand layer scours out at the driveway apron where cars turn. Once sand is gone, edges chip. We re-sand with a stabilized polymeric joint sand and check the apron transition, which is where the loss almost always starts.
- Settling and rutting over failed base. Class II base compacted in lifts is what carries a driveway. When a previous install skipped compaction or used too little depth, Belgard pavers over it will rut in the wheel paths within a couple of seasons. Our fix is a full lift-and-rebase, not another sand top-off that hides the problem for a year.
- Edge restraint failure. The plastic or concrete edge that holds the field in place is the most-underrated part of any Belgard installation. When it lifts, the outer course spreads and gaps open. We reset the field and replace the restraint where it’s lost its grip.
- Color fade and staining near irrigation and downspouts. Belgard’s integral color holds up well, but constant splash from a downspout or a misdirected sprinkler will stain and dull any paver. We trace the water source and correct grading or drainage before we clean and re-sand, so the surface stays consistent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
Every Belgard job follows the same six steps, whether it’s a reset of twenty pavers or a full driveway in Willow Glen.
- 1
On-site diagnosis. We walk the surface, measure slope, check the apron and edge restraint, and probe the base where settling shows. You get a written line-item quote from that visit.
- 2
Material decision. If you’re matching an existing Belgard field, we confirm the exact series and color so new units blend. Where a discontinued color is the issue, we walk you through the closest current match and what it will look like against the old field.
- 3
Base and drainage correction. We remove the affected field, correct or rebuild the base in compacted lifts, and fix the grading or drainage that caused the failure.
- 4
Install and reset. Pavers go back down to the correct slope, edge restraint is set, and joints are filled with stabilized polymeric sand.
- 5
Cleanup and walkthrough. We clean the surface, haul debris, and walk the finished work with you.
- 6
The 730-Day Done Right Promise. If anything we installed isn’t right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in San Jose

Here are the ranges we quote for Belgard work in San Jose. These are real local numbers, not national averages, and they reflect what we actually see in this market.
| Belgard Service | Typical Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway replacement | $5,900 – $16,520 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway sealing | $295 – $825 |
What moves the price: square footage, how deep the base has to be rebuilt, whether the old surface needs full haul-off, the specific Belgard series you choose, and how much edge restraint and drainage work is involved. A reset of a small settled area costs far less than a full driveway. We quote each line so you can see exactly where the money goes. Call (833) 988-3521 for a free estimate.
Why San Jose Homeowners Call Groundwork Construction Co. of San Jose for Belgard Work
Homeowners in San Jose call us because a Belgard job done wrong is expensive to fix twice. Our technicians have up to 12 years of experience, and they know how these pavers behave over San Jose’s clay soil and summer heat. Every project is backed by the 730-Day Done Right Promise, in writing. Calls are answered by a live person, 24/7, so you’re not waiting until Monday for an answer. Technicians are background-checked and arrive in uniform, and you get upfront pricing with no surprises. We also carry verified brand partners across every trade, including KraftMaid, Kohler, GAF and PGT, so one company can handle the whole project from foundation to finish line. Built to last, backed in writing.
FAQs

It can, which is why we follow Belgard’s installation standards for base depth, compaction and joint sand. Poor base work or the wrong joint sand is the most common reason a Belgard warranty claim gets denied, so we do it to spec from the start. Our own 730-Day Done Right Promise covers our workmanship on top of that. Call (833) 988-3521 for a free estimate.
Sometimes, and we’ll tell you honestly when we can’t. If your existing field is a current Belgard line, we confirm the exact series and color before ordering. If it’s discontinued, we show you the closest current match in person so you can see how it reads against the old pavers before committing. Call (833) 988-3521 to schedule a look.
Repair when the base is sound and only a small area has settled or lost joint sand. Replace when rutting runs the length of the wheel paths or the edge restraint has failed across the field, because that means the base itself is the problem. We diagnose which one you’re facing on site before quoting. Call (833) 988-3521 for a free estimate.
A small reset or repair is usually one to three days, and a full Belgard driveway is typically three to seven days, weather and base condition depending. Clay soil and spring rain can add a day if the base needs extra drying or rebuild time. Call (833) 988-3521 to get a schedule for your project.
No. We quote upfront pricing with no surprises, and the number you see is the number you pay. If we open the base and find something genuinely unexpected, we stop and show you before doing anything that changes the scope. Call (833) 988-3521 for your free estimate.
Written by the team at Groundwork Construction Co. of San Jose, serving San Jose and nearby areas.












