







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Campbell, CA: What It Costs and What It Takes
Asphalt Driveways & Resurfacing in Campbell typically runs $3,500 – $9,000 for a new asphalt drive on a typical small lot, with resurfacing over an existing sound base landing lower than a full tear-out. Most jobs take 2 to 4 days of actual work, but the asphalt needs a cure window before you park on it. Call (833) 988-3521 for a free on-site estimate with line-item pricing. Campbell’s tight lots and narrow side yards shape how a driveway gets built here.
How We Build or Resurface an Asphalt Drive in Campbell

Asphalt is unforgiving of shortcuts. The surface you see is only the top two inches; everything under it decides whether the drive lasts 15 years or cracks in three. Here’s the sequence, and where you make decisions.
- Stage 1: Site check and layout (half a day). We measure the drive, look at drainage fall, and check what’s under the existing surface by core-sampling or a test dig. On Campbell’s postwar ranch lots we often find old gravel, decomposed base, or the remnant of a previous pour. You decide at this point whether we do a full removal or an overlay.
- Stage 2: Demo and excavation (1 – 2 days). If we’re tearing out, the old asphalt comes up and goes to a recycler, and we excavate to a depth that fits your base and asphalt thickness. On alley-load lots or narrow side entries, this is where the truck access and material staging get planned. You’ll want to move cars off the drive and clear the street for a few hours a day.
- Stage 3: Base prep and grading (1 – 2 days). We lay and compact an aggregate base, graded to shed water away from the garage slab. Compaction is done in lifts, not one pass. Poor base is the number one reason a new asphalt drive in Campbell fails, and it’s the step nobody sees.
- Stage 4: Paving (a single day for most residential drives). Hot asphalt is laid at 2 to 3 inches compacted for residential use, rolled, and edge-tacked to the concrete apron or curb. Your decision here is thickness and mix; for a light-use driveway, standard mix works, but for a slope or turn-heavy entry we’ll spec a heavier binder.
- Stage 5: Cure and seal. You can walk on it within 24 to 48 hours and drive on it in roughly 3 to 7 days depending on weather. First seal coat waits 6 to 12 months so the asphalt fully cures. We’ll schedule that separately.
At each stage you’re approving something concrete: the removal method, the base depth, the mix, and the seal timing. Nothing gets priced after the fact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Asphalt Resurfacing or Replacement
The trade-offs here are real. Here’s what we walk Campbell homeowners through before a shovel hits the ground.
- Full replacement vs. overlay (resurfacing). Overlay is cheaper, faster, and works when the base is sound. But if the base is failing or has settled, overlay just adds weight to a bad foundation. On older Campbell lots, full replacement usually wins.
- Asphalt thickness. A 2-inch compacted lift is the residential standard; a 3-inch lift costs more but resists cracking on slopes and heavier vehicle traffic. You pick based on use.
- Base depth and material. Class II aggregate base at 4 to 6 inches is typical; deeper base for softer or clay-heavy ground. This is the single biggest driver of longevity.
- Drainage approach. A crowned surface, a slight cross-slope, or a trench drain at the garage. Each has a cost and works best with a specific lot shape.
- Edge treatment. Concrete curbing or a compacted shoulder. Curb gives a cleaner edge and holds up better against Campbell’s summer heat.
- Seal coat timing and frequency. A seal coat every 2 to 3 years protects against UV and water intrusion. Skipping it doesn’t save money in the long run.
We quote each option as a line item so you can see exactly what the difference in price buys you. If the driveway is part of a full Driveway & Pavers in Campbell project that also touches front walks or a patio, we’ll scope the whole thing together.
What Asphalt Driveways & Resurfacing Costs in Campbell, CA

Pricing for this job in Campbell runs $3,500 – $9,000 for a new asphalt driveway and $5,000 – $14,000 when the project is a full driveway replacement. A standalone seal coat is $250 – $700 depending on square footage. Five factors move you up or down within those ranges.
- Square footage. A typical Campbell lot drive is 400 to 600 square feet. Every extra 100 square feet adds cost, and long runs with curves add more.
- Existing condition. A failed base or significant settling means full removal and rebuild. A sound surface that just needs a fresh top is the low end.
- Access and staging. Narrow side yards, alley-load access, or a drive that requires hand-carrying material all push the number up. On Campbell’s tight lots, this is often the hidden cost.
- Base and thickness. A deeper base and 3-inch lift cost more but hold up better. That’s a real trade-off, not a sales pitch.
- Permit scope. If the drive touches the public right-of-way or the apron needs to be reworked, that permits and inspections come into play. We’ll tell you upfront what the City of Campbell requires for your project.
Your written estimate includes removal, base, asphalt, rolling, edge treatment, and cleanup. It excludes any repair to the garage slab, drainage improvements beyond what we scope, and the later seal coat. Call (833) 988-3521 and we’ll walk the drive with you.
See the difference
Before
After
Before
After
Before
AfterWhat Campbell Homes Specifically Do to This Job
Campbell is an old orchard town turned Silicon Valley bedroom community, and most of the housing stock is 1950s – 1960s ranch and Eichler-era tract homes on small lots, with a pocket of century-old downtown bungalows and newer infill townhomes. That matters for a driveway: on a small postwar lot, the drive often runs within a couple of feet of the property line, with narrow side access and a garage slab that’s settled since it was poured. We regularly see this in the blocks off Campbell Avenue and around the Pruneyard-adjacent streets. The City of Campbell’s design review and massing rules apply mainly to vertical additions, but driveways that touch the right-of-way still go through the building department. And because we’re in a rain-shadowed basin with hot dry summers and wet winters, we schedule asphalt work for the dry season so the surface cures properly and doesn’t get rained on before it sets. If you’re also adding a Chain Link Fence in Campbell along the property line, that’s often done after the asphalt cures, not before.
Serving Campbell, CA – Our Local Coverage Area
We serve Campbell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Campbell

Most residential jobs take 2 to 4 working days of active construction, plus a cure window of 3 to 7 days before you park on it. The weather window matters here, so we schedule around Campbell’s wet winters. Call (833) 988-3521 for a timeline specific to your lot.
A straight overlay or resurfacing within your existing drive usually doesn’t require a building permit, but anything touching the public right-of-way or the apron typically does. We confirm the requirement with the City of Campbell before the job starts. Call (833) 988-3521 and we’ll tell you what applies to your project.
Sometimes. Overlay works when the base is sound and the existing surface hasn’t settled or cracked through. On older Campbell lots with shallow base, full replacement is often the smarter long-term call. We’ll core-sample and tell you honestly which one makes sense.
Asphalt paving runs $3,500 – $9,000, with full replacement in the $5,000 – $14,000 range and a standalone seal coat at $250 – $700. The variables are size, base condition, and access. Call (833) 988-3521 for an exact quote on your drive; estimates are free.
Every asphalt project is covered by our 730-Day Done Right Promise. If something isn’t right within that window, we make it right. That’s in writing, not a verbal handshake. Call (833) 988-3521 for the details on your specific scope.
Get a Free Estimate on Your Campbell Asphalt Drive
If you’re weighing a new asphalt drive or a resurfacing job in Campbell, the fastest path is a free on-site estimate. We’ll measure the drive, check the base, and hand you a written line-item quote with no surprises. Call (833) 988-3521; a live person answers around the clock. Ask us about the $1,000 off projects over $10,000 and 0% financing for 18 months if the scope grows. We also handle ADU Site Prep & Utilities in Campbell and full Driveway & Pavers work, so one call covers more than just the asphalt. Our Campbell team will schedule the walkthrough at your convenience.
Written by the team at Groundwork Construction Co.












