







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Jose Homeowners Choose PGT Construction
Groundwork Construction Co. of San Jose provides independent PGT construction service in San Jose, covering repair, re-glazing, adjustment, and full replacement of PGT vinyl and aluminum window and door systems. What makes our PGT work different is the diagnostic step: we confirm the exact series, glazing designation, and hardware before anyone quotes a fix, so a fogged WinGuard pane doesn’t get sold to you as a whole-window replacement. We are an independent PGT service provider, not affiliated with or authorized by PGT, and we connect you with local pros who quote PGT work on its own merits. Call (833) 988-3521 for a free estimate.
Why Trust Groundwork Construction Co. of San Jose for Your PGT Construction?

PGT ships a lot of product into the South Bay, and the units installed here are not the same mix you’d see in Florida or the Gulf Coast. Our technicians have up to 12 years of experience, and they’ve learned to read the sticker on the glass and the stamp on the sash before touching anything. That matters because PGT’s WinGuard aluminum line and its vinyl single-hung and slider lines use different glazing tapes, different setting blocks, and different sash balance hardware. Order the wrong part and the frame-to-glass fit goes off, which on an impact-rated unit is a real problem, not a cosmetic one.
We work OEM-compatible on anything that carries a rating. Sashes, rollers, locks, weatherstrip, and IGU assemblies get matched to the series and the date code where we can find it. Service is done in a warranty-safe sequence: we document existing conditions, we don’t drill or cut in ways that compromise the frame’s rating, and we hand back the paperwork a manufacturer would ask for. Nothing about that is glamorous. It’s just the difference between a repair that holds through a rainy winter and one that comes back in eighteen months. All work is covered by our 730-Day Done Right Promise, and the number on the estimate is the number on the invoice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in San Jose
San Jose’s climate is gentle on people and hard on glazing. Mild wet winters and long dry summers cycle the glass and frame dozens of times a year, and the failures below are the ones that come up over and over in this market.
- Seal failure and internal fogging on WinGuard insulated glass units. That hazy band between the panes is a failed perimeter seal, not condensation you can wipe away. South Bay heat cycling is the usual driver: the unit expands and contracts daily, the seal fatigues, and moisture gets in. On a rated unit the pane has to be re-glazed to spec or the impact rating goes with it.
- Vinyl sash and frame distortion on west- and south-facing elevations. San Jose summer sun hits a west wall for five or six hours straight. PGT vinyl sashes, particularly on older Acclaim and Premier single-hungs, can bow enough that the sash drags or the lock no longer lines up. It’s thermal, not a defect in the unit, and it’s why we check elevation and exposure before recommending a fix.
- Sliding door roller and track wear on PGT aluminum patio doors. Nylon rollers flatten and the track fills with grit, so the panel drags, jumps, or comes off the track entirely. Nine times out of ten the door is fine and the rollers and track are the problem.
- Perimeter flashing and caulk joint failure at window openings. Winter storms find every gap. When the caulk joint at the sill or the flashing at the head lets go, water gets behind the frame and shows up as staining on interior drywall weeks later. Re-caulking over a failed flashing just traps the water.
- Hardware and lock misalignment after settling. Older San Jose homes move. When a frame racks slightly, the keeper and the lock stop meeting, and homeowners assume the lock is broken when the frame is the issue.
A typical call here goes like this: a San Jose homeowner notices a hazy band between the panes of a PGT WinGuard slider and a door that drags on its track after a hot summer. The usual cause is a failed insulated glass seal combined with worn nylon rollers and a slightly out-of-level track. A qualified local pro typically confirms the unit’s glazing designation, re-glazes or replaces the IGU to keep the impact rating, and re-levels the track with fresh rollers rather than forcing the frame.
PGT Parts & Our Repair-vs-Replace Approach

OEM PGT sashes, rollers, locks, and weatherstrip keep the frame-to-glass fit and the impact rating intact, and that’s what we specify on any rated assembly. Quality aftermarket hardware is acceptable in narrow cases: interior components and non-rated sliding-door parts where the fit is verifiable and the rating isn’t in play. We source parts per job from suppliers who can match the series and date code. We don’t claim to stock PGT parts locally, and any shop that says it does is worth asking a follow-up question.
Repair versus replace is an honest call, not a sales one. A single failed IGU on an otherwise sound WinGuard frame gets re-glazed. A flattened roller set on a patio door gets re-wheeled and the track re-leveled. But when a vinyl frame has distorted past the point where a new sash will seal, or when several units on the same elevation are failing within a year of each other, replacing them together usually costs less than chasing them one at a time. We’ll show you both numbers. Call (833) 988-3521 and we’ll walk your PGT units and give you a written quote.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT series and glazing designation, check the date code, and test operation on every unit in scope. On sliders we check the track for level and the rollers for flat spots. On fixed units we confirm whether the fogging is a seal failure or interior condensation.
- 2
Repair or install scope in writing. You get a line-item quote naming the parts, the glazing spec, and whether the unit carries a rating that constrains the fix. Upfront pricing, no surprises.
- 3
Permits where required. Replacement windows and patio doors in San Jose can trigger permit and impact-rating review depending on scope and the unit’s rating. We pull what’s needed and manage the inspection.
- 4
The work. Re-glazing, hardware replacement, track re-leveling, or full unit replacement, done to keep the frame and rating intact. Most single-unit repairs are completed in a single visit.
- 5
Test and hand-off. Every unit gets operated, latched, and checked for seal and drainage before we leave. You get the documentation, and the work sits under our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in San Jose
We cover PGT WinGuard Aluminum impact-resistant windows and doors, WinGuard Vinyl single-hung and horizontal slider windows, Acclaim and Premier vinyl single-hung replacement windows, and PGT aluminum sliding glass patio doors. That’s the range that actually shows up in San Jose housing stock, from postwar tract homes in Willow Glen and the Rose Garden to newer infill. Service includes re-glazing, sash and roller replacement, lock and hardware work, weatherstrip, track re-leveling, and full unit replacement where repair no longer makes sense. Impact Window Installation and Garage Conversion work are both common scopes for us on PGT-equipped homes.
We Also Service These Brands
Groundwork Construction Co. of San Jose isn’t tied to a single manufacturer. Alongside PGT, we work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing, and our broader portfolio includes Andersen, Pella, CertainTeed, James Hardie, and Belgard. If your project touches more than one trade, you deal with one contractor from foundation to finish line instead of juggling three.
FAQs – PGT Construction Service in San Jose

No. We are an independent PGT service provider and are not affiliated with, authorized by, or endorsed by PGT. We service and install PGT products on their merits, and we don’t represent ourselves as factory-certified. Call (833) 988-3521 with questions about your specific unit.
Yes, in most cases. A failed seal and the resulting fogging between the panes is an insulated glass unit problem, not a frame problem. If the sash and frame are sound, the IGU can be replaced to the correct glazing spec, which preserves the impact rating and costs far less than a full unit. Call (833) 988-3521 for an exact quote; estimates are free.
Thermal distortion on sun-exposed elevations and worn balance hardware are the two usual causes. West- and south-facing PGT vinyl sashes take hours of direct summer sun, and older Acclaim and Premier units can bow enough that the sash drags or the lock stops lining up. Sometimes it’s a simple hardware and adjustment fix. Call (833) 988-3521 and we’ll tell you which one you’re looking at.
Almost always the track and rollers, not the door. Flattened nylon rollers and a track that’s collected grit or gone slightly out of level will make a sound panel drag or jump. Re-wheeling and re-leveling usually fixes it in a single visit. Call (833) 988-3521 to schedule an estimate.
It can, depending on the scope and whether the unit carries an impact rating. San Jose’s permitting is neighborhood-specific and strict, and replacing a rated assembly with a non-rated one is where homeowners get caught. We handle the permit review and pull what’s required. Call (833) 988-3521 and we’ll scope it before any work starts.
We can’t speak for PGT or act on their behalf, and any warranty claim on a manufacturer defect has to go through PGT’s own process. What we do is work in a warranty-safe way: we document conditions, use OEM-compatible parts on rated assemblies, and avoid anything that would compromise the unit’s rating. Our own work is covered by the 730-Day Done Right Promise. Call (833) 988-3521 for a free estimate.
It depends on the scope, but these are the ranges we work from in this market. All figures are upfront and locked before work begins.
| PGT Service | Typical San Jose Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Garage Conversion | $35,400 – $94,400 |
Call (833) 988-3521 for an exact quote on your PGT units – estimates are free, and so is the design consult. The price you see is the price you pay, and 0% financing for 18 months is available.
Book Your PGT Service in San Jose, CA
Whether you’re chasing a fogged WinGuard pane, a patio door that won’t glide, or a full impact window replacement across the house, call Groundwork Construction Co. of San Jose at (833) 988-3521. A live person answers, 24/7. Estimates are free, pricing is upfront, and every job is backed in writing by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co..












