







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Mountain View, CA: What It Costs and How Long It Takes
A chain link fence in Mountain View typically runs $3,500 to $9,000 installed, and most residential yards take two to four days from demo to final walk-through. You’re pricing galvanized or vinyl-coated mesh on steel posts, set in concrete, with gates framed and hung. Permits and a survey can add a week or more before anyone digs. Call (833) 988-3521 for a free on-site estimate with a written line-item quote.
How We Build a Chain Link Fence, Stage by Stage

Chain link looks simple until you’re the one setting posts on a property line you don’t fully control. Here’s the actual sequence we run, and where you make decisions.
Stage 1: Site walk and boundary check (day 1, about an hour)
We walk the line with you, confirm where the fence needs to sit, and flag anything that complicates it: a shared property line you’ll want surveyed, a slope, a buried irrigation line, or a tree root ball in the post path. This is where you decide whether to pull a survey or trust the existing pins. On Mountain View lots, that decision comes up more than people expect.
Stage 2: Permit and utility locate (2 to 10 days, depending on scope)
Fences under a certain height often don’t need a building permit, but corner lots, front-yard setbacks, and anything over the city’s height threshold usually do. We handle the submittal and the utility locate so nobody hits a gas or water line on dig day. You sign; we file. If the fence is part of a full Fence Installation in Mountain View scope that includes other materials, the permit package covers it together.
Stage 3: Demo and layout (day 3, half to full day)
Old fence comes out, posts get marked at 8- or 10-foot spacing, and we set string lines to keep the run true through grade changes. Rotted posts, concrete footings, and overgrown ivy slow this down. A straight, level run with clean removal is a half day; a rocky or sloped line can stretch it to a full day.
Stage 4: Post setting and cure (day 3 to 4, then a cure window)
Posts go in concrete at the depth the soil and wind load call for, plumb and aligned. Concrete needs to cure before you tension mesh, so we either return the next day or set posts and hang the following morning. In Mountain View’s mild climate this stays on schedule year-round; wet winters are the only real weather risk.
Stage 5: Framing, mesh, and gates (day 4, full day)
Top rail, tension wire, mesh, and gate hardware go on last. We tension the fabric so it doesn’t sag, hang gates so they latch clean, and walk the finished line with you before we pack up. Most residential jobs land at two to four days of actual work once the permit clears.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Most of the price swing on a chain link fence is a handful of choices, not labor. Here’s what actually matters.
- Mesh gauge and coating: Standard residential mesh is 11.5 gauge; heavier 9 gauge costs more but shrugs off kids, dogs, and errant basketballs. Galvanized mesh is the budget pick and lasts; vinyl-coated mesh (green or black) costs 10 to 20 percent more and looks markedly better against landscaping.
- Post size and wall thickness: 2-inch posts at a heavier wall hold up on taller runs and wind-exposed lots. On a standard 4-foot residential fence, the lighter post is fine; on 6-foot runs or exposed corners, step up.
- Height and top style: 4-foot is the common residential height; 5- and 6-foot runs cost more and may trigger a permit or a neighbor conversation depending on line and lot. Barbed or topped rails are commercial territory and usually out of place on a home lot.
- Gates: A drive gate and a walk gate are each an added line item. Swing gates are the default; sliding gates cost meaningfully more. If gate hardware or a self-closing hinge matters, say so at the estimate, not after.
- Brand of hardware and system: We work with established names like Ameristar and ActiveYards where they fit the job; on plain galvanized residential runs, the system matters less than the gauge and the install.
What a Chain Link Fence Costs in Mountain View, CA

Expect $3,500 to $9,000 for a typical residential chain link fence in Mountain View. That range covers most linear-footage and gate configurations for a single-family lot; larger properties, drive gates, and premium coatings push toward the high end.
| Line item | Typical range |
|---|---|
| Standard galvanized chain link, residential run | $3,500 – $6,500 |
| Vinyl-coated mesh (green/black) | $4,500 – $7,500 |
| Heavier gauge / taller run | $6,000 – $9,000 |
| Walk gate, hung and latched | Adds to base |
| Drive gate | Adds to base |
What moves the number: total linear footage, existing fence removal and disposal, lot slope and soil (rock and hardpan slow digging), gate count and type, and permit scope. What’s in a written estimate: materials, labor, removal, disposal, post concrete, and permit handling where required. What’s often outside it: a property-line survey if you want one, regrading, and any repair to irrigation or landscaping the fence line crosses.
See the difference
Before
After
Before
After
Before
AfterWhat Mountain View Homes Specifically Do to a Chain Link Fence Job
Mountain View’s housing stock is the story here. Much of the city is 1950s to 1970s single-story ranch and Eichler-style homes on slab-on-grade foundations, and the lots reflect that era: narrow side yards, established trees with root systems already in the ground, and property lines marked by original pins or nothing at all. That changes the job. A fence line that has to thread between a mature oak and a neighbor’s shed is a different install than a clean empty lot, and old pins that don’t match the deed are common enough that we ask about a survey up front.
The permitting culture is demanding, and the reason is the collision of a historic suburban community with a global corporate headquarters town: inspectors here are used to detailed submittals on everything from seismic retrofits to all-electric remodels, and fence permits get the same close read. Corner lots in particular run into front-yard setback and height questions. If your project grows beyond the fence line, homeowners often pair this with ADU Site Prep & Utilities in Mountain View, and if a converted garage or a bonus room is in play, address it before closeout, not after. When a gate butts up against a structure, they also pair it with Door Installation in Mountain View. And because Mountain View sits in the mild South Bay with warm dry summers and wet winters but almost no frost, fence work can proceed year-round; the summer dry season is simply the nicer stretch to be outside for a walk-through. We cover the whole city, including the ZIPs 94035, 94039, 94042, and 94040.
Serving Mountain View, CA – Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Mountain View

Most residential chain link fences take two to four days of work once the permit clears, with a survey or permit adding a week or more up front. Call (833) 988-3521 and we’ll give you a realistic timeline for your lot at the estimate.
It depends on height, location on the lot, and whether it’s a corner property; short rear-yard runs often don’t, while taller or front-yard fences usually do. We check the requirement for your specific lot and handle the submittal if one is needed. Call (833) 988-3521 to find out for your address.
Plan on $3,500 to $9,000 for a typical residential chain link fence, with coating, gauge, height, and gate count driving the swing. Call (833) 988-3521 for an exact quote; estimates are free.
Usually yes. We do a utility locate before digging, route posts around established root systems where we can, and flag irrigation or supply lines that cross the line during the site walk. Call (833) 988-3521 to walk the yard with us.
Every fence project is covered by our 730-Day Done Right Promise, and the materials carry the manufacturer’s own warranty. Call (833) 988-3521 for the written terms before you sign anything.
Get a Free Chain Link Fence Estimate in Mountain View
We’ll walk the line with you, check the property pins, flag the permit question, and leave you with a written line-item quote, no surprises. If you’re ready to price a chain link fence in Mountain View, call (833) 988-3521. A live person answers around the clock, the on-site estimate is free, and our fence installation team covers the surrounding Mountain View area as part of the wider service.
Written by the team at Groundwork Construction Co.












