







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Gilroy: What the Job Really Takes
New cabinets and countertops in Gilroy usually run $14,000 – $45,000 for a full kitchen’s worth, and most jobs are finished in two to three weeks from demo to final caulk. You’ll be without a working sink and range for part of that stretch, so plan around it. The work itself is sequential: cabinets get set and leveled first, templating happens after, and the countertops go in last. Call (833) 988-3521 to schedule a free on-site estimate and get a written number before anything gets ordered.
How We Sequence Cabinets & Countertops, Stage by Stage

Cabinet and countertop work fails or succeeds on sequence. Skip a step and you get a door that rubs, a seam that shows, or a sink that doesn’t drop in clean. Here’s the order we hold to on Gilroy jobs, with the timing you should expect at each stage.
1. Site measure and layout confirmation (days 1 – 3 before order)
We measure the actual room, not the drawing. That means checking for out-of-square walls, high or low spots in the floor, and where the existing plumbing supply and drain lines sit. This is where you lock the cabinet footprints, door style, and where the range, sink, and refrigerator land. Changes after this point cost real money, so decide here. On Gilroy homes with older walls, this step often turns up surprises worth knowing about before cabinets arrive.
2. Demo and prep (1 – 2 days)
Out go the old cabinets and counter. If the old counter is tile, that’s a messier day than laminate; if it’s stone, it may come out in pieces. We check the wall behind for water damage and the floor for level before anything new goes in. This is also when any electrical or gas relocation gets roughed in if the layout is changing.
3. Cabinet install (2 – 3 days)
Base cabinets first, shimmed and scribed to the wall, then uppers. Crown, fillers, and panels get fitted so the run reads as one piece. Doors and drawers get hung last so nothing gets knocked out of alignment during the rest of the install. You’ll walk the hinges and drawer slides before countertop templating.
4. Template and stone fabrication (5 – 10 business days for stone)
A fabricator comes out to template the exact cabinet line and sink cutout. Stone gets cut and polished off-site, which is where the waiting lives on a quartz or granite job. Laminate or butcher block skips this wait, which is a real timing advantage if you’re living in the house during the work.
5. Countertop set, sink, backsplash, final walk (1 – 2 days)
The stone or laminate goes in, the sink and faucet drop through, and the final trim and caulk close things out. Backsplash is a separate scope with its own page, but we’ll coordinate it into this window so you’re not juggling two crews.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
The decisions that move both your price and how the kitchen feels five years from now come down to box construction, door material, and countertop surface. Here’s the honest trade-off on each.
- Stock cabinets – Fixed sizes, fastest availability, the most budget-friendly box. You fill gaps with filler strips, and layout flexibility is limited.
- Semi-custom (KraftMaid-grade) – Made to your dimensions with a real choice of door styles and finishes. Costs more than stock, but you gain a proper fit in older Gilroy kitchens that were never square.
- Full custom – Built to the inch in any species or finish. Suits large or irregular rooms, and it’s the priciest tier.
- Plywood vs. particleboard boxes – Plywood holds screws better and tolerates moisture swings; particleboard is cheaper and fine in dry, well-vented kitchens.
- Quartz – Non-porous, no sealing, consistent color. It’s the most requested surface right now and it handles heavy daily use.
- Granite – Natural stone, one-of-a-kind pattern, needs periodic sealing. Priced close to quartz, so the choice is aesthetic, not durability.
- Laminate – The budget leader. Modern laminate holds up far better than the 1990s version, though it won’t take a hot pan like stone will.
- Butcher block – Warm, easy to repair, needs oiling. It suits prep-heavy cooks and shortens the fabrication wait dramatically.
What Cabinets & Countertops Costs in Gilroy, CA

A full kitchen’s worth of cabinets and countertops in Gilroy runs $14,000 – $45,000, before you add a backsplash or island. Cabinet installation alone typically lands $4,000 – $13,000, and countertop installation runs $2,000 – $6,500. The number lands at the low or high end based on five things:
- Room size and run length – A galley kitchen and a big open kitchen with an island are different jobs entirely.
- Existing condition – Out-of-square walls, uneven floors, and old water damage add prep labor before cabinets go in.
- Layout changes – Moving the sink, range, or fridge means relocating plumbing, gas, or electrical, which adds real cost.
- Material grade – Stock with laminate and semi-custom with quartz sit at opposite ends of the same room.
- Permit scope – A like-for-like swap usually doesn’t need one; moving plumbing or electrical does, and that adds both fees and inspection time.
Your written estimate itemizes every line: demo, cabinets, countertop, labor, disposal, and permit fees if they apply. What it typically doesn’t include is backsplash tile, new appliances, or plumbing fixture upgrades unless you add them, and we say so up front rather than surprising you mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Gilroy Homes Specifically Do to This Job
Gilroy sits at the southern tip of Santa Clara County, where ranch and farm land meets the fast build-out along Highway 101. That mix shows up in the cabinets and countertops work here in ways it doesn’t in San Jose or Morgan Hill. The older single-story ranch homes near the historic downtown in 95020 were built before anyone cared about square walls or standard cabinet depths, so a semi-custom fit often beats stock. The newer tract homes pushing toward the 101/152 edges bring standard framing and standard cabinet sizes, so the install runs cleaner. Gilroy’s summer heat is another factor: it runs 10 – 15°F hotter than coastal Santa Clara County, and that swings humidity in a kitchen enough to matter for wood doors and solid-wood drawer fronts. Cabinet doors on a hot south-facing wall need a stable finish. If you’re adding an island or reworking the layout, homeowners often pair this with a Kitchen Remodeling in Gilroy scope to handle floor and lighting at the same time. And if the kitchen is part of a larger property plan, we dovetail the cabinet work with a Garage Conversion ADU in Gilroy or New Detached ADU in Gilroy when those projects share a timeline.
Serving Gilroy, CA – Our Local Coverage Area
We serve Gilroy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Gilroy

Most jobs run two to three weeks from demo to final walk. Stone countertops add the longest single wait, five to ten business days for fabrication, while laminate or butcher block cuts that stretch. The cabinet install itself is the fast part at two to three days. Call (833) 988-3521 and we’ll give you a realistic window for your specific layout.
A straight swap of cabinets and countertops in the same locations usually doesn’t require a permit. You do need one when the job moves plumbing, gas, or electrical, or when it changes the structural layout. Because Gilroy straddles county and city jurisdiction lines in places, we confirm the requirement for your specific address before work begins. Call (833) 988-3521 with your address and we’ll tell you where your project stands.
Yes, and it’s the most common job we do. Keeping the sink, range, and refrigerator where they are keeps the price and the schedule tight, because no plumbing or gas lines move. You swap box for box, then upgrade the countertop material for the biggest visual change. Call (833) 988-3521 for a free estimate on a like-for-like replacement.
Cabinets and countertops together run $14,000 – $45,000 for a full kitchen in Gilroy. Cabinet installation alone is $4,000 – $13,000, and countertop installation is $2,000 – $6,500. The spread comes down to room size, material grade, and whether the layout moves. Call (833) 988-3521 for an exact quote on your kitchen, and the estimate is free.
Every cabinet and countertop installation we handle is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we make it right. Call (833) 988-3521 and we’ll walk you through what the promise covers on a job like yours.
Get a Written Estimate on Your Gilroy Kitchen
If you’re pricing new cabinets and countertops in Gilroy, call (833) 988-3521 for a free on-site estimate. We’ll measure the room, check for out-of-square walls and plumbing locations, and give you a line-item written quote before anything is ordered. Upfront pricing, no surprises, and a real person answers the call. When the job is ready to run, our Kitchen Remodeling team and the wider Gilroy crew are standing by.
Written by the team at Groundwork Construction Co.












