







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Morgan Hill: What They Cost and How Long They Take
A paver driveway in Morgan Hill runs $7,000 to $18,000 for most residential lots, and a typical installation takes three to five working days from demo to joint sand. That number covers excavation, a compacted base, bedding layer, pavers, edge restraint and cleanup. Call (833) 988-3521 and we’ll walk your driveway and put the number in writing, line by line, before anything gets torn out.
How a Paver Driveway Goes In, Stage by Stage

Paver driveways live or die on what’s underneath them. The surface is the part you see, but the base and drainage decide whether it still looks right in ten summers. Here’s the actual sequence we follow, and where you make decisions along the way.
Stage 1: Layout, demo and haul-off (day 1)
We mark the finished grade and slope first, because water has to run off the driveway and away from the garage sill. Then the old surface comes out: concrete, asphalt, gravel or lawn, plus roots and soft soil. On a standard two-car apron this is a full day, sometimes a day and a half when there’s concrete to break and haul. You decide here whether the driveway stays the same footprint or widens, and that decision sets everything downstream.
Stage 2: Excavation and base prep (day 1 into day 2)
We dig down far enough for the compacted base plus bedding plus the paver thickness, which on a driveway means roughly 8 to 10 inches of total build-up. Soft spots get over-excavated and replaced with aggregate. On larger Morgan Hill lots with slope, this is where drainage gets designed in. We grade to a fall of about 1.5 to 2 percent away from the structure.
Stage 3: Base compaction and edge restraint (day 2)
Base goes in lifts of 2 to 3 inches, and each lift gets compacted with a plate compactor before the next one. Skipping this step is the number-one reason pavers settle and heave two winters later. The edge restraint goes in now, pinned to the compacted base, because that hidden channel is what stops the field from spreading.
Stage 4: Setting the pavers (day 3)
We screed a bedding layer, then set the field in the pattern you’ve chosen, cutting edges on a wet saw for a tight border. A 1,000 square foot driveway takes most of a day with two setters. This is also the day the driveway takes its final shape, so if you want to change a border color or a soldier course, that conversation happens before the field goes down, not after.
Stage 5: Joint sand, compaction and cleanup (day 3 or 4)
Polymeric joint sand goes into the joints, the whole field gets a final pass with the compactor, and we sweep and wash. Stay off the pavers for 24 to 48 hours while the sand sets. Keep cars off for the full cure window in wet weather.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter for Paver Driveways
Most of the price spread between a $7,000 job and an $18,000 job comes from these decisions, so it’s worth going through them carefully before you sign anything.
- Paver material: Concrete pavers cost less and come in dozens of colors and shapes; clay brick runs higher and holds its color longer under sun. Belgard is a familiar name in this category and worth comparing against a local supplier’s line.
- Thickness: 60mm pavers are the standard for pedestrian and light drive use; 80mm is worth the upcharge if you park a heavy truck or a trailer. On a driveway it’s not splurging, it’s the correct spec.
- Pattern: Herringbone and running bond are the workhorses; a basketweave or a custom circle adds labor and cutting time. Patterns that require more cuts cost more per square foot.
- Border and accent: A contrasting soldier course or a charcoal accent band is a small material cost and a noticeable visual upgrade. It also gives the driveway a clean edge line.
- Drainage approach: A proper slope away from the house is standard. On larger lots with grade, a channel drain or a swale can be added so runoff doesn’t pool against the garage.
- Base spec: Class II aggregate is the standard; some jobs use a stabilized base for heavier loads or softer soils. We’ll tell you which one your ground actually needs.
If the driveway is part of a larger project, the same base and grading logic carries over to a Driveway & Pavers in Morgan Hill scope, so it’s worth planning both at once rather than tearing into the same soil twice.
What Paver Driveways Cost in Morgan Hill, CA

Most paver driveway installations in Morgan Hill land between $7,000 and $18,000. Here’s the line-item picture so you can see what’s driving the number:
| Item | Typical range |
|---|---|
| Paver driveway installation (full scope) | $7,000 – $18,000 |
| Driveway replacement (remove old surface and rebuild) | $5,000 – $14,000 |
| Driveway sealing (protection once pavers are in) | $250 – $700 |
What moves a job toward the high end:
- Square footage: A standard two-car apron is roughly 400 to 600 sq ft. A long rural approach of 1,200 sq ft or more is the single biggest lever on price.
- Existing surface and condition: Tearing out a thick concrete slab and hauling it costs more than lifting old asphalt or grading bare soil.
- Base work: Soft or clay-heavy ground may need over-excavation and imported aggregate. On sloped lots, drainage and grading add labor.
- Paver grade and pattern: 80mm pavers, clay brick, intricate patterns and accents all cost more than standard 60mm units in a running bond.
- Access: A narrow or gated approach that won’t take a skid steer means more hand labor, so it’s worth flagging before the estimate.
Your written estimate should itemize demo, haul-off, base depth, paver type and thickness, edge restraint, joint sand and cleanup. Ask directly what’s excluded: landscape repair along the edges, permit fees, and drainage tie-ins are the usual items that show up as surprises later. Upfront pricing, no surprises means the number we quote is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Morgan Hill Lots Do to This Job That Other Cities Don’t
Morgan Hill sits where Silicon Valley’s built-out edges meet the still-working orchards of the south county, and that single fact changes how paver driveways get built here. On the foothill custom lots, we’re grading a long approach to a private drive with real fall, sometimes working around a septic field or a private well line, which is work you simply don’t run into on a flat tract lot over in Gilroy or San Jose. Off Monterey Road and through the wine-country corridor, we’re more often on former ranch or orchard parcels where the subgrade is variable and drainage has to be designed rather than assumed. Hot, dry summers also mean the pavers take real heat cycling, so a proper polymeric joint sand and a quality base aren’t optional. Projects here tend to hinge on grading and drainage first, appearance second.
Where we commonly work: infill parcels along Monterey Road, the larger ranch-era lots east of the highway, and the foothill homes where the driveway is genuinely long. If your project is part of a bigger exterior plan, our Driveway & Pavers service handles the wider scope, and homeowners often pair this with Door Installation in Morgan Hill or a Cabinets & Countertops in Morgan Hill refresh while the exterior is already torn up. We cover all of Morgan Hill, ZIP codes 95037 and 95038 included, and the surrounding area.
Serving Morgan Hill, CA – Our Local Coverage Area
We serve Morgan Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Morgan Hill

Three to five working days for most Morgan Hill driveways, with larger or sloped lots pushing toward a week once base work and drainage are factored in. Weather adds time in winter. Call (833) 988-3521 for a timeline based on your actual driveway.
Often yes, especially when the driveway changes the footprint, alters drainage, or crosses a public right-of-way. The local professional we connect you with handles permitting as their local code requires and pulls it before demo, so the inspection schedule doesn’t stall the crew. Call (833) 988-3521 and we’ll tell you what your project likely needs.
Sometimes, if the slab is sound, well-drained and the added height won’t interfere with the garage door or a threshold. Usually it’s better to remove and rebuild the base properly. Call (833) 988-3521 and we’ll assess your slab honestly.
Most installations run $7,000 to $18,000, with the spread driven by square footage, existing surface, base work, paver grade and access. Call (833) 988-3521 for an exact quote. Estimates are free and the number is written down.
All work is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. The local pro is licensed and insured as their state requires, and our technicians have up to 12 years of experience. Call (833) 988-3521 with any warranty question before you sign.
Get a Free Estimate on Paver Driveways in Morgan Hill
A free on-site estimate is the fastest way to know what your driveway will cost. We’ll measure the footprint, look at existing surface and drainage, and hand you a written, itemized quote with the paver options that fit your budget. No pressure, no vague numbers. Call (833) 988-3521, a live person answers around the clock, and we’ll get the walk-through scheduled.
Written by the team at Groundwork Construction Co.












