







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Morgan Hill, CA
Concrete driveways and concrete work in Morgan Hill typically run $4,500 to $12,000 for a new driveway pour, and small flatwork like aprons, pads, and walkway tie-ins lands lower on that scale. Most single-driveway jobs take 3 to 5 working days from demo to cure, and a full replacement with new base and grading runs 5 to 7 days. Call (833) 988-3521 to schedule a free on-site estimate and a written, line-item quote before any concrete gets ordered.
How we pour a Morgan Hill driveway, stage by stage
Concrete work has a rhythm, and the days don’t blur together the way they do on some trades. Here’s the real order of operations on a Morgan Hill job.
- Day 1 – Layout, saw-cut demo, and haul-off. We mark the final grades with the homeowner standing right there, then cut and break out the old slab if there is one. On the large foothill lots we see off Monterey Road and up into the hills, haul-off alone can eat most of a day because a dump truck has to navigate a long, narrow private drive. You decide the exact width, the expansion-joint pattern, and where the apron meets the street.
- Day 2 – Excavation, subgrade, and base. We cut to depth (typically 4 inches of slab on a driveway, 6 inches where a loaded vehicle parks), compact the subgrade, and bring in 4 to 6 inches of compacted Class 2 base. This is the stage nobody sees and the one that decides whether the slab cracks in three years or thirty. On sloped Morgan Hill lots, this is where drainage grading and erosion control get set, so you’ll want to confirm the fall direction away from the foundation before we lock it in.
- Day 3 – Formwork, rebar or mesh, and inspection. Forms go up, reinforcement gets tied on chairs so it sits in the middle of the slab, and we call for the pre-pour inspection if the scope requires a permit. Homeowners sign off on slope and joint locations before anything is wet.
- Day 4 – Pour, finish, and control joints. The truck arrives, we place and screed, then finish to the agreed texture (broom, light salt, or saw-cut pattern). Control joints get cut within 6 to 12 hours, which is the single biggest defense against random cracking. Cure begins immediately after.
- Day 5 and beyond – Cure, seal, and cure time before you drive on it. Typical mix design lets you walk on it in 24 hours and drive on it in 7 days, with full design strength at 28 days. A penetrating sealer goes on once the slab has dried, usually 28 days out. That’s a second short visit, not a return to square one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete options you’ll actually choose between
Concrete isn’t one product. The choices below are the ones that change both the look and the number on the quote.
- Standard broom-finish concrete – the default for a reason. Grippy, forgiving, and the lowest-cost finish in the range. It suits the long, utility-focused driveways on the orchard-era parcels and is the honest pick when budget matters more than curb appeal.
- Exposed aggregate – adds roughly 15 to 25 percent to the base pour cost. The surface reveals the stone in the mix, which hides tire marks and dust better than a smooth broom finish. Good on sunny Morgan Hill exposures where a plain slab starts looking chalky.
- Fiber-reinforced vs. rebar vs. mesh – synthetic fibers reduce plastic shrinkage cracking, rebar handles structural load, and welded wire mesh is the middle option. For a driveway that takes a truck or RV, rebar on chairs is the choice we recommend and it costs more than mesh.
- Thickness and base depth – 4 inches is standard for passenger cars; 5 to 6 inches is right for heavy vehicles or a sloped foothill drive where loads concentrate. Each inch of slab and base adds cost but buys service life.
- Sealer – a penetrating sealer runs $250 to $700 for a typical driveway and needs refreshing every few years. It’s optional, but it slows surface wear and makes staining easier to clean.
One note: if the project grows into a full hardscape plan, that’s a different conversation – our Driveway & Pavers service covers the paver and finishing side, and it’s often part of a full Driveway & Pavers in Morgan Hill project when a homeowner wants concrete and pavers side by side.
What Concrete Driveways & Concrete Work costs in Morgan Hill, CA

Expect $4,500 to $12,000 for a new concrete driveway in Morgan Hill, and $5,000 to $14,000 for a full replacement that includes demo and haul-off of the old slab. Small flatwork and pads fall below the low end. Here’s how the line items break down:
| Line item | Typical range |
|---|---|
| New concrete driveway pour | $4,500 – $12,000 |
| Full driveway replacement (demo + new) | $5,000 – $14,000 |
| Concrete sealer application | $250 – $700 |
What pushes a job toward the high end:
- Size and shape. A standard two-car drive sits near the low end; a long rural approach on a foothill lot runs high because of cubic yards, base material, and haul distance.
- Existing condition. Thick, reinforced old slabs and root-heaved concrete cost more to break out and haul.
- Grading and drainage. Sloped lots that need retaining or drainage correction add real cost, and this is common on the hillside parcels around Morgan Hill.
- Material grade. Exposed aggregate, thicker slabs, and rebar over mesh each add to the base.
- Permit scope. A structural driveway cut or a new curb cut pulls in inspection time and fees; a straight replacement on an existing footprint usually doesn’t.
A written estimate from us lists demo, excavation, base, reinforcement, pour, finish, joints, and haul-off line by line, with the number you see being the number you pay. It does not include landscaping repair beyond the work zone, landscape lighting, or future re-sealing. If you’re planning a detached structure too, homeowners often pair concrete flatwork with ADU Site Prep & Utilities in Morgan Hill so the slab and utility trenches go in together.
See the difference
Before
After
Before
After
Before
AfterWhat Morgan Hill homes specifically do to this job
Morgan Hill sits where Silicon Valley’s build-out meets the still-agricultural south county, and that shows up in the concrete. A lot of the work is infill on former orchard and ranch parcels plus high-end remodels on large lots, which means we’re often grading a long approach, tying into a rural septic or well line, and working around existing fencing rather than pouring on a flat tract pad the way you would in San Jose or Gilroy. The mid-century ranch homes and the 1980s-to-2000s subdivisions east of Monterey Road bring their own issues: original driveways that have settled or cracked from root heave, and expansions where the new slab has to meet an older one at the same grade. Winter rain makes drainage and erosion control a real part of the scope on the foothill lots, and the dry summers and fire-season scrutiny mean homeowners pay close attention to what’s outside the house too. Permits and inspections here follow Santa Clara County expectations, so we confirm the scope against the local building department before we form anything up.
Serving Morgan Hill, CA – Our Local Coverage Area
We serve Morgan Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Morgan Hill

Most driveways take 3 to 5 working days from demo to finish, plus 7 days before you drive on it and 28 days to full cure. A replacement with grading and a permit inspection stretches to about a week of active work. Call (833) 988-3521 for a schedule built around your specific lot.
A straight replacement on an existing footprint often doesn’t need one, but a new driveway, a curb cut, or work tied to a structure usually does. We confirm the requirement with the local building department before the pour and pull what’s needed so the inspection passes. Call (833) 988-3521 and we’ll walk through your scope.
Usually yes. We locate the utilities and pour around or over them wherever code and depth allow, so most jobs don’t require relocating a water or sewer line. If a line sits too shallow for the new grade, we’ll flag it in the written quote rather than surprise you mid-pour. Call (833) 988-3521 for an exact quote – estimates are free.
A new driveway runs $4,500 to $12,000, and a full replacement runs $5,000 to $14,000, with sealing at $250 to $700. Size, existing slab condition, grading, and material grade are the levers. Call (833) 988-3521 for a written, itemized estimate.
No – our upfront pricing means the number you see is the number you pay. The only way a price moves is if you add scope, and we put that in writing before we touch it. Every project is backed by our 730-Day Done Right Promise. Call (833) 988-3521 to get started.
If doors are part of the same exterior refresh, homeowners often pair this with Door Installation in Morgan Hill; for a full exterior upgrade, our Morgan Hill service area page lays out what else is available.
Get a free concrete estimate for your Morgan Hill driveway
Call (833) 988-3521 to schedule a free on-site estimate for concrete driveways and concrete work in Morgan Hill. A real person answers, day or night, and we’ll walk your lot, measure the run, confirm the drainage, and hand you a written line-item quote with the number you’ll actually pay. No-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












