







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in San Jose, CA
A tub-to-shower conversion in San Jose typically costs $6,500 to $16,000, and most projects wrap up in one to two weeks. It’s the process of tearing out an old alcove tub and framing in a walk-in shower that fits the same footprint, with new waterproofing, tile, a linear or center drain, and glass. Thousands of San Jose homes still have a standard 60-inch tub that nobody under 50 uses anymore, and converting it reclaims floor space you already own.
Groundwork Construction Co. of San Jose handles these conversions from demolition through final caulk line. We’ve been in business since 2014, our technicians have up to 12 years of experience, and we back every conversion with the 730-Day Done Right Promise. If a shower pan leaks or a tile pops loose inside that window, we make it right. Call (833) 988-3521 and a live person answers, day or night.
This page zeroes in on the tub-to-shower piece. For the bigger picture on vanities, layouts, and full renovations, see our Bathroom Remodeling service page.
Key Takeaways
- Most tub-to-shower conversions in San Jose land between $6,500 and $16,000 depending on size, tile, and glass.
- Permits are required in most San Jose cases, and we pull them for you as part of the project.
- Waterproofing is the part that matters most. We use a bonded sheet or liquid membrane over cement board, never greenboard behind tile.
- Project timelines run 7 to 14 working days for a standard alcove conversion.
- 0% financing for 18 months and $1,000 off projects over $10,000 are available on qualifying conversions.

When You Need Tub-to-Shower Conversion
Most San Jose homeowners call us for one of a handful of reasons. If any of these sound familiar, a conversion is probably the right move.
- The tub goes unused for years. In the ranch homes off Meridian Avenue and the post-war tracts around Willow Glen, a second bathroom often has a tub nobody has stepped into since the kids moved out. You’re heating and cleaning a surface area you don’t use.
- Mobility or safety concerns. A 14-inch tub wall is a real fall hazard once a parent or grandparent is doing the stepping. A low-threshold or curbless shower with grab bars is the standard answer, and we build them regularly in San Jose for exactly this reason.
- Water damage around the tub enclosure. San Jose’s older housing stock has plenty of tub surrounds where 1980s tile and drywall have been quietly failing for decades. Once we open it up, we usually find soft framing behind the faucet wall.
- You want the floor space back. A tub deck in a compact Willow Glen or Cambrian bathroom eats real square footage. A shower can open up a foot or more of usable floor inside the same footprint.
- You’re selling or refinishing for resale. A clean, modern walk-in shower is one of the first things a San Jose buyer notices in a primary suite. Dated tile tells a story, and it’s usually a negotiating point against you.
- You’re converting for aging-in-place. San Jose’s older residents are remodeling to stay home longer. A zero-threshold shower with blocking installed for future grab bars is the practical choice.
Our Tub-to-Shower Conversion Process
Every conversion follows the same sequence, though the details shift with each bathroom. Here’s how we run it, start to finish.
- Free estimate and design consult. We walk the bathroom, measure the alcove, and talk through layout, tile, glass, and fixtures. We give you a written number up front. No guessing later, no change-order surprises. The number you see is the number you pay.
- Permit. Most tub-to-shower conversions in San Jose require a plumbing permit through the city’s Building Division, and some require a building permit too. We pull it for you and schedule the inspections. Ask any contractor who says you don’t need one to put that in writing.
- Demo and rough-in. We pull the tub, cut back to studs, and check the drain location and valve. Old galvanized or polybutylene lines get swapped for PEX or copper while the wall is open. San Jose’s hot-water demand during summer peak loads is a real issue in older homes, and we upsize pressure-balance valves to match.
- Waterproofing. Backer board goes up, seams are taped with alkali-resistant mesh, and the whole wet area gets a bonded sheet or liquid membrane that ties into the drain flange. This is the step that decides whether your shower lasts 15 years or leaks into the garage ceiling in three. We don’t shortcut it.
- Tile and glass. Floor tile goes in on a sloped mortar bed or a pre-sloped pan, with the slope checked to the drain. Wall tile, niche, and glass panels come next. Kohler fixtures and frameless glass are the most-called-for combination in our San Jose projects.
- Final walkthrough. We run the shower, check every drain, run a flood test on the pan before tile, and walk the finished room with you before we call it done. Then the 730-Day Done Right Promise kicks in.

Tub-to-Shower Conversion Pricing in San Jose
Prices for tub-to-shower conversions in San Jose run from about $6,500 for a basic acrylic-pan conversion to well over $16,000 for a fully tiled walk-in with frameless glass and premium fixtures. The range is wide because tile and glass drive a huge share of the cost. Here’s roughly how it breaks down.
| Scope | Typical Range in San Jose |
|---|---|
| Acrylic or fiberglass pan and surround, like-for-like footprint | $6,500 – $9,500 |
| Tiled shower with pan, tile walls, and semi-frameless glass | $9,500 – $13,500 |
| Tiled curbless or low-threshold shower with frameless glass | $12,000 – $16,000 |
| Add-ons: niche, bench, niche with glass, grab bars, extra body sprays | $400 – $2,500 each |
| Plumbing relocation (moving drain or valve) | $900 – $2,800 |
| Permit fees (San Jose) | Varies by scope; built into the estimate |
The biggest cost levers are tile choice, glass configuration, and whether the drain and valve move. Porcelain large-format tile in the $6 to $9 per square foot range gets you a clean job at the lower end. Mosaic floors and slab walls push toward the top. Frameless glass generally runs $1,800 to $3,500 installed. And a drain move that requires opening a floor slab or joist bay is the single most common cost surprise in a conversion, which is why we measure before we quote.
On top of pricing, three standing offers apply to most conversions over $10,000: $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months. That’s the upfront pricing, no surprises approach. If a competing bid looks dramatically lower, ask what waterproofing method they’re using and whether the permit is included. Cheap showers are cheap because something’s missing underneath.
Want an exact number for your San Jose bathroom? Call (833) 988-3521. The estimate is free, and someone answers whenever you call.
Tile, Glass, and Fixtures That Hold Up in San Jose
San Jose’s climate is mild, but its housing stock ranges from 1920s bungalows to 2010s townhomes, and the shower details have to match. In older homes, stud spacing is sometimes 24 inches, which calls for additional blocking behind glass panels and grab bars. In newer construction, you may be dealing with PEX and pressure-balanced valves from the start, which makes the plumbing side simpler. We sort through that in the estimate, not mid-project.
For tile, we typically recommend porcelain over natural stone in a shower floor. San Jose’s water is moderately hard, and natural stone requires more sealing and more careful cleaning to stay looking good. Porcelain mosaic floors on the shower pan handle that better. On the walls, large-format porcelain reads clean and modern and hides grout lines, which matters because grout is where shower mildew lives.
For fixtures, Kohler is our standard recommendation for valves and trim. We also work with Moen, Delta, and Grohe depending on the budget. Grab bars and blocking go in before tile, always. Retrofitting a grab bar into finished tile never looks as clean as planning it in.
Why We Handle the Waterproofing Detail Differently
Waterproofing is where most tub-to-shower conversions fail. We’ve repaired plenty of showers that were done by someone else and leaked within five years, and the pattern is almost always the same: tile over drywall or greenboard, no membrane at the seams, and no flood test. In San Jose, where a bathroom shower pan often sits above a first-floor ceiling or a garage, a slow leak shows up as a stain on drywall long after the damage is done.
Our approach: cement board, taped seams, a bonded roll-on or sheet membrane tied into the drain flange, and a flood test before tile. The drain flange connection is the most common failure point, and it’s the one most crews don’t check. We do. That’s what the 730-Day Done Right Promise is built around.
How Long Does a Tub-to-Shower Conversion Take in San Jose?
A standard tub-to-shower conversion in San Jose takes 7 to 14 working days from demo to final walkthrough. The bulk of that time is tile setting, grout curing, and the glass template-to-install wait, not the framing or plumbing. Permits can add a week or two to the front end depending on the city’s inspection queue, and we plan for that.
Most jobs run on a single-visit schedule: demo day one, rough-in and waterproofing day two or three, tile across several days, grout and glass the following week. You’ll have a working bathroom door again before the glass goes in. If you have a hard deadline like a family visit or a rental turnover, tell us at the estimate and we’ll build the schedule around it.
Is a Tub-to-Shower Conversion Right for Your San Jose Home?
It depends on three things: who uses the bathroom, what’s on the other side of the wall, and your budget timeline. For a primary bathroom where nobody takes baths, a conversion is a straightforward win on space and resale. For a hall bath serving kids or guests, a shower/tub combo often makes more sense, and we’ll tell you so. For a home being prepped for aging in place, the zero-threshold shower is the right call.
We’ll also flag structural considerations during the walkthrough. Tub alcoves in some San Jose homes sit over a lowered subfloor or a crawl space, and moving the drain isn’t always simple. We check before we quote. That’s the upfront pricing promise in practice: what we measure is what we bid.
For the wider renovation picture, including vanity swaps, lighting, and full bathroom remodels, see our Bathroom Remodeling in San Jose page. If you’re comparing options across services, our home page lists everything we do.
Brands We Work With on San Jose Conversions
We don’t stock parts and we don’t run a warehouse. We work with a curated set of brand partners across every trade, and we connect you with the right materials for the job. On tub-to-shower conversions, the names that come up most are Kohler for valves and trim, Moen and Delta for budget-conscious installs, and Grohe when a homeowner wants European styling. Glass comes from local fabricators we’ve worked with repeatedly, and we measure in person before templating.
On the exterior side of the same home, our partners include GAF and CertainTeed for roofing and James Hardie for siding. For fencing, we work with Ameristar, Jerith, Bufftech, and ActiveYards. Different trade, same standard: verified partners, no mystery materials.
Why Choose Groundwork Construction Co. of San Jose
Four things stand out when you work with us on a tub-to-shower conversion.
- 730-Day Done Right Promise. If a shower pan leaks, a valve fails, or a tile pops, we come back and fix it. Two full years of workmanship coverage, in writing.
- Live person, 24/7. Call anytime and someone answers. No voicemail, no callback tomorrow, no waiting until Monday.
- Background-checked, uniformed technicians. Our crew shows up in uniform and on schedule. We’ve been doing this since 2014, and our technicians have up to 12 years of experience across tile, plumbing, and waterproofing.
- Upfront pricing, no surprises. The estimate is a written number. Change orders only happen when you authorize them, not when the crew finds a bad surprise behind the wall.
Add the 0% financing for 18 months and the $1,000 off projects over $10,000, and a full conversion is more reachable than most San Jose homeowners expect.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in San Jose?
A tub-to-shower conversion in San Jose typically runs $6,500 to $16,000, with most projects landing around $9,500 to $12,000 for a tiled shower with semi-frameless glass. The number moves most with tile choice, glass configuration, and whether the drain or valve needs to move. Call (833) 988-3521 for an exact quote. The estimate is free, and someone answers around the clock.
Do I need a permit for a tub-to-shower conversion in San Jose?
Yes, in most cases you need a permit through the City of San Jose Building Division, because the conversion changes the plumbing fixture and often the drain location. We pull the permit for you and schedule inspections. A contractor who tells you a permit isn’t needed is telling you something worth writing down.
Can you do a tub-to-shower conversion in one day?
No. A real tub-to-shower conversion takes a week or more because tile, waterproofing, and glass need time to set and cure. A one-day install usually means a pre-fabricated acrylic surround dropped over the existing tub, which is a different product with a shorter lifespan. We’ll quote you both if you’re weighing them, but our standard conversion is a full tear-out and rebuild.
Is a tub-to-shower conversion worth it for resale in San Jose?
Usually yes, especially in a primary bathroom. San Jose buyers consistently favor walk-in showers over dated tub surrounds. A clean, well-waterproofed conversion reads as a maintained home. If you’re prepping to sell, we can tell you during the estimate what makes the most sense for your neighborhood and price bracket.
What’s the difference between a curbless shower and a low-threshold shower?
A curbless shower has no lip at the floor, so the bathroom floor transitions straight into the shower. It requires the drain to be recessed into the framing or the floor to be built up, which adds cost. A low-threshold shower has a small 2 to 3-inch lip and works in more existing conditions. For aging-in-place, curbless is the gold standard. We’ll tell you which one your floor structure supports.
Will the shower leak into the room below?
Not if it’s waterproofed correctly. We use a bonded membrane tied into the drain flange, run a flood test before tile, and inspect every seam. The 730-Day Done Right Promise covers workmanship, so if a leak shows up inside that window, we come back and make it right. The most common failure we see in other showers is a missing drain flange tie-in, and it’s the first thing we check.
Ready to get a real number on your San Jose tub-to-shower conversion? Call (833) 988-3521 for a free estimate and design consult. A live person answers 24/7, and we’ll give you upfront pricing plus the 730-Day Done Right Promise in writing. From foundation to finish line, we handle the whole job.
Written by the team at Groundwork Construction Co. of San Jose, serving San Jose.


